How to Pick the Best Plumbing Training near Bullhead City Arizona

The initial step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Bullhead City AZ. But with numerous vocational schools to select from, just how do you go about making certain that you enroll in the ideal one? Especially since there are a number of points to examine. For instance, some prospective students will start by looking for schools that are nearby their home. Once they have located several that are within driving range, they will select the one with the lowest tuition. While location and cost are of importance, they are not the sole qualifications that should be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and other qualifiers should help mold your ultimate decision when selecting a plumbing training school. We will discuss that checklist in greater detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Bullhead City AZ plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Bullhead City AZ plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Bullhead City AZ is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Bullhead City AZ to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Now that you have decided to earn a certificate, diploma or degree, you can begin to narrow down your school options. Considering that there are numerous plumbing tech and trade schools in the Bullhead City AZ region, it's imperative to have a checklist of qualifications that each program must satisfy. The first 2 that we mentioned were location and tuition expense. And even though both qualifiers may be critical when making your selection, there are additional variables that must be taken into account as well. Following is a checklist of those additional qualifications that you will need to research before selecting a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have earned either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Bullhead City AZ school and program are accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you get an excellent education, it can help in securing financial aid or student loans, which are often unavailable for non-accredited programs. Additionally, many states mandate that the plumbing training program be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Arizona Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Bullhead City AZ schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate could signify that students were dissatisfied with the course and quit. It could also suggest that the instructors were not competent to instruct the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the field, but also that it has the network of contacts to help grads secure apprenticeships or employment in the Bullhead City AZ area.

Are Apprenticeship Programs Sponsored?  Most plumber trade programs are taught in conjunction with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Find out if the schools you are reviewing have working relationships with local Bullhead City AZ plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also furnishes employment opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. Otherwise, ask a local Bullhead City AZ plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Bullhead City AZ residence. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can see how big they are and experience the interaction between instructors and students. Talk with a few of the students and get their feedback relating to class sizes and instruction. Finally, talk with a few of the instructors and learn what their level of experience is in Bullhead City AZ and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you can only go to classes in the evening or on weekends near Bullhead City AZ, confirm that the schools you are considering offer those choices. If you can only attend on a part-time basis, make certain that the school you select allows part-time enrollment. Additionally, check out what the policy is to make-up classes should you miss any due to work, sickness or family responsibilities.

Learn More About Bullhead City Plumber Training Schools

Choose the Right Bullhead City Plumbing Training School

Selecting the right plumber trade school will undoubtedly be the most important decision you will make to launch your new trade. As we have discussed in this article, there are many factors that you will need to assess and compare among the schools you are considering. It's a must that any plumber tech school that you are examining includes a considerable amount of hands-on training. Classes need to be small in size and each student should have their personal equipment to train with. Classroom instruction needs to provide a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Courses vary in length and the type of credential provided, so you will need to determine what length of program and credential will best serve your needs. Each program provides unique possibilities for certification as well. Probably the best approach to research your short list of schools is to check out each campus and speak with the students and faculty. Invest some time to sit in on some classes. Inspect the campus and facilities. Make sure that you are confident that the training program you select is the best one for you. With the proper training, hard work and dedication, you can become a professional plumber in Bullhead City AZ.