How to Find the Best Plumbing Technical School near Chandler Arizona

The first step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Chandler AZ. But with so many technical schools to pick from, just how do you tackle making certain that you enroll in the best one? Especially because there are a number of factors to consider. For example, some prospective students will begin by looking for schools that are close to their home. After they have found some that are within driving distance, they will decide on the one with the cheapest tuition. Even though location and cost are significant, they are not the sole factors that must be evaluated. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should influence your ultimate judgment when picking a plumber trade school. We will discuss that checklist in greater detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the training options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Chandler AZ plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Chandler AZ plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Chandler AZ is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Chandler AZ to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Vocational Schools

When you have made a decision to earn a diploma, certificate or degree, you can start to focus your school options. Considering that there are numerous plumbing trade and vocational schools in the Chandler AZ area, it's essential to have a checklist of criteria that each program must satisfy. The first 2 that we discussed were location and tuition expense. And even though both qualifiers may be crucial when making your decision, there are other factors that must be considered as well. Below is a checklist of those additional qualifiers that you will need to assess prior to choosing a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have earned either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Make sure that the Chandler AZ school is accredited by a U.S. Department of Education acknowledged accrediting organization, which includes the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive a superior education, it may assist in securing financial assistance or student loans, which are often not available for non-accredited schools. Also, some states require that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Arizona Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Chandler AZ schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate may signify that students were dissatisfied with the course and dropped out. It may also suggest that the instructors were not qualified to instruct the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to help graduates secure apprenticeships or jobs in the Chandler AZ area.

Are Apprenticeship Programs Sponsored?  Numerous plumber trade programs are taught together with an apprenticeship or an internship program. Those participating vocational and trade schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Find out if the schools you are considering have working partnerships with local Chandler AZ plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also furnishes employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. If not, ask a local Chandler AZ plumbing contractor if they can give you some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within driving distance of your Chandler AZ residence. Take note that if you decide to enroll in an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized training as possible, which can be challenging in larger classes. Ask if you can monitor some of the classes so that you can observe how large they are and experience the interaction between students and instructors. Speak with some of the students and get their opinions concerning class sizes and instruction. Finally, talk to a few of the teachers and learn what their level of experience is in Chandler AZ and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Chandler AZ, check that the programs you are considering offer those choices. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, illness or family emergencies.

Get More Info About Chandler Plumbing Training Schools

Choose the Right Chandler Plumber Training School

Choosing the ideal plumbing training program will undoubtedly be the most critical decision you will make to begin your new profession. As we have discussed in this article, there are many factors that you will need to assess and compare between the schools you are considering. It's a necessity that any plumbing training that you are considering includes a lot of hands-on training. Classes should be smaller in size and every student should have their own equipment to train with. Classroom teaching needs to provide a real-world context, and the training program should be current and in-line with industry standards. Programs differ in duration and the kind of credential offered, so you will need to decide what length of program and credential will best satisfy your needs. Every program offers different possibilities for certification also. Perhaps the best means to research your final list of schools is to go to each campus and talk with the teachers and students. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you choose is the right one for you. With the proper training, hard work and dedication, you can become a professional plumber in Chandler AZ.