How to Pick the Best Plumbing Training Course near Springdale Arkansas

The first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Springdale AR. But with so many technical schools to select from, just how do you approach making sure that you enroll in the ideal one? Especially since there are so many points to examine. For instance, some potential students will commence by searching for schools that are close to their residence. Once they have found some that are within commuting range, they will pick the one with the lowest tuition. Although location and cost are of importance, they are not the sole things that should be considered. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and additional qualifications should influence your final decision when choosing a plumbing training school. We will address that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the training choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Springdale AR plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Springdale AR plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Springdale AR is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Springdale AR to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Training Schools

Now that you have made a decision to obtain a diploma, certificate or degree, you can start to narrow down your training options. Considering that there are numerous plumbing tech and trade schools in the Springdale AR region, it's important to have a checklist of qualifications that each school must meet. The first 2 that we mentioned were location and tuition expense. And while both qualifiers may be critical when making your selection, there are other factors that need to be taken into account as well. Following is a checklist of those added qualifiers that you will need to research prior to selecting a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have received either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Make certain that the Springdale AR school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you get a quality education, it may help in acquiring financial aid or student loans, which are in many cases unavailable for non-accredited schools. Additionally, many states mandate that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Arkansas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Springdale AR schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate may signify that students were unhappy with the course and dropped out. It could also signify that the instructors were not qualified to instruct the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the industry, but additionally that it has the network of contacts to assist graduates secure apprenticeships or jobs in the Springdale AR area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught along with an internship or an apprenticeship program. Those participating vocational and trade schools will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Ask if the schools you are comparing have working partnerships with local Springdale AR plumbers or plumbing specialists. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also supplies employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be working with on the job. If you are already in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local Springdale AR plumbing contracting company if they can give you some pointers.

Where is the School Located?  Unless you are willing to move, the school must be within driving distance of your Springdale AR home. Take note that if you decide to attend an out-of-state school, in addition to moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and experience the interaction between teachers and students. Talk with a few of the students and get their opinions relating to class sizes and instruction. Finally, speak to some of the teachers and find out what their level of experience is in Springdale AR and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you can only go to classes in the evening or on weekends near Springdale AR, check that the programs you are reviewing provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, check out what the protocol is to make-up classes should you miss any due to work, illness or family responsibilities.

Get More Info About Springdale Plumbing Tech Schools

Choose the Right Springdale Plumbing Trade School

Selecting the right plumbing trade school will probably be the most important decision you will make to begin your new trade. As we have discussed in this article, there are many things that you will need to evaluate and compare among the schools you are looking at. It's a necessity that any plumber training program that you are considering includes a lot of hands-on instruction. Classes need to be smaller in size and each student must have their own equipment to train with. Classroom instruction should provide a real-world context, and the training program should be current and in-line with industry standards. Courses differ in length and the type of credential offered, so you will have to ascertain what length of program and credential will best serve your needs. Each program offers different possibilities for certification also. Probably the best way to research your final list of schools is to check out each campus and talk with the faculty and students. Invest some time to monitor some classes. Tour the campus and facilities. Make sure that you are confident that the training program you select is the right one for you. With the right training, effort and dedication, you can become a professional plumber in Springdale AR.