Home >> Arkansas >> Van Buren >> Plumber Trades Schools


Request Free Info on Plumbing Trade Schools Van Buren AR 72956


How to Choose the Best Plumber School near Van Buren Arkansas

Van Buren Arkansas plumber installing kitchen sink faucetThe initial step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near Van Buren AR. But with so many technical schools to pick from, just how do you go about making sure that you enroll in the best one? Especially since there are a number of points to consider. For instance, some prospective students will start by searching for schools that are close to their residence. After they have identified some that are within commuting range, they will decide on the one with the lowest tuition. Although location and cost are of importance, they are not the sole factors that must be evaluated. Also important are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and additional qualifications should influence your final decision when choosing a plumber training school. We will cover that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the educational choices that are available.

Becoming a Plumber

Van Buren Arkansas plumber repairing water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Van Buren AR plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Van Buren AR plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Van Buren AR is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Van Buren AR to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Technical Schools

Van Buren Arkansas plumbing contractor repairing hot water heater

Once you have made a decision to obtain a diploma, certificate or degree, you can start to narrow down your training options. Considering that there are so many plumbing tech and trade schools in the Van Buren AR region, it's essential to have a checklist of criteria that each school must meet. The initial two that we mentioned were location and tuition expense. And while both qualifiers may be critical when making your determination, there are additional variables that must be considered also. Following is a checklist of those added qualifications that you will need to assess before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing trade schools have received either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Verify that the Van Buren AR school and program are accredited by a U.S. Department of Education recognized accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping make certain that you receive an excellent education, it may help in obtaining financial aid or student loans, which are often not available for non-accredited programs. Also, some states mandate that the plumbing training course be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Arkansas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Van Buren AR schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate might signify that students were unhappy with the program and dropped out. It may also signify that the instructors were not qualified to train the students. It's also essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the industry, but additionally that it has the network of contacts to help students obtain apprenticeships or employment in the Van Buren AR area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught in conjunction with an apprenticeship or an internship program. Those participating vocational and trade programs will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Ask if the schools you are considering have working partnerships with local Van Buren AR plumbers or plumbing specialists. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also furnishes employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be instructed on are state-of-the-art and what you will be using on the job. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. If not, ask a local Van Buren AR plumbing company if they can provide some suggestions.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Van Buren AR home. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk with some of the students and get their comments relating to class sizes and instruction. Finally, talk to some of the teachers and find out what their level of experience is in Van Buren AR and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Van Buren AR, confirm that the programs you are reviewing offer those options. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any because of work, illness or family issues.

Get More Info About Van Buren Plumber Trade Schools

Choose the Right Van Buren Plumbing Trade School

Selecting the right plumbing training program will probably be the most critical decision you will make to start your new career. As we have discussed in this article, there are many factors that you will need to examine and compare among the training programs you are looking at. It's a necessity that any plumbing training program that you are considering includes a considerable amount of hands-on training. Classes need to be small in size and each student must have their own equipment to train with. Classroom education should provide a real-world context, and the training program should be up-to-date and conform with industry standards. Courses differ in duration and the kind of credential offered, so you will need to determine what length of program and certificate or degree will best serve your needs. Every program offers unique possibilities for certification as well. Perhaps The ideal way to research your short list of schools is to go to each campus and speak with the teachers and students. Take the time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you decide on is the ideal one for you. With the proper training, hard work and dedication, you can become a professional plumber in Van Buren AR.