How to Enroll in the Best Plumbing Training near Cameron Park California

The first step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Cameron Park CA. But with so many vocational schools to select from, just how do you go about making sure that you enroll in the best one? Especially because there are so many factors to evaluate. For example, some potential students will begin by looking for schools that are close to their home. After they have identified a few that are within driving range, they will pick the one with the least expensive tuition. Although location and cost are significant, they are not the only things that must be considered. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and other qualifiers should influence your ultimate decision when choosing a plumbing trade school. We will talk about that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Cameron Park CA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Cameron Park CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Cameron Park CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Cameron Park CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Training Schools

Now that you have made a decision to earn a certificate, diploma or degree, you can start to focus your training options. Since there are so many plumbing trade and vocational schools in the Cameron Park CA area, it's imperative to have a checklist of criteria that each school must meet. The initial two that we discussed were location and tuition expense. And although both qualifiers may be critical when making your decision, there are other variables that must be considered as well. Below is a checklist of those additional qualifications that you will need to assess before choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have received either a regional or a national accreditation. They can earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Make certain that the Cameron Park CA program and school are accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain an excellent education, it can help in securing financial assistance or student loans, which are often not available for non-accredited schools. Additionally, a number of states mandate that the plumbing training program be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the California Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Cameron Park CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate could suggest that students were dissatisfied with the program and dropped out. It could also signify that the teachers were not competent to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the industry, but also that it has the network of contacts to assist grads acquire apprenticeships or jobs in the Cameron Park CA area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Find out if the schools you are considering have referring relationships with local Cameron Park CA plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also provides employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. If not, ask a local Cameron Park CA plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you are able to move, the school must be within driving distance of your Cameron Park CA residence. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can monitor a few of the classes so that you can observe how big they are and witness first hand the interaction between instructors and students. Talk with several of the students and get their opinions concerning class sizes and instruction. Finally, speak with a few of the teachers and find out what their level of experience is in Cameron Park CA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Cameron Park CA, confirm that the programs you are comparing offer those options. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any due to work, illness or family issues.

Find Out More About Cameron Park Plumbing Training Schools

Choose the Best Cameron Park Plumbing Trade School

Selecting the best plumber training program will undoubtedly be the most critical decision you will make to begin your new career. As we have covered in this article, there are many things that you will need to evaluate and compare between the training programs you are looking at. It's a prerequisite that any plumbing training program that you are evaluating includes a considerable amount of hands-on training. Classes should be smaller in size and every student should have their personal equipment to train with. Classroom teaching should offer a real-world context, and the training program should be up-to-date and conform with industry standards. Courses differ in duration and the kind of credential provided, so you will have to decide what length of program and certificate or degree will best serve your needs. Every program provides unique possibilities for certification also. Probably the best means to research your short list of schools is to go to each campus and speak with the students and faculty. Invest some time to sit in on some classes. Tour the campus and facilities. Make certain that you are confident that the school you decide on is the ideal one for you. With the proper training, hard work and commitment, you can become a professional plumber in Cameron Park CA.