How to Enroll in the Right Plumber School near Fresno California

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Fresno CA. But with so many technical schools to select from, just how do you undertake making sure that you enroll in the right one? Especially because there are so many points to examine. For example, many potential students will start by searching for schools that are close to their home. After they have located some that are within driving distance, they will pick the one with the lowest tuition. While location and cost are significant, they are not the only factors that need to be examined. Also important are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and other qualifications should contribute toward your ultimate judgment when choosing a plumbing trade school. We will cover that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Fresno CA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Fresno CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Fresno CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Fresno CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Technical Schools

When you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your training options. Because there are numerous plumbing vocational and trade schools in the Fresno CA region, it's imperative to have a checklist of criteria that each program must meet. The initial two that we discussed were location and tuition expense. And even though both qualifiers may be important when making your decision, there are other variables that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to assess before selecting a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing trade programs have received either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Confirm that the Fresno CA program and school are accredited by a U.S. Department of Education recognized accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping guarantee that you acquire a superior education, it can assist in obtaining financial aid or student loans, which are in many cases not available for non-accredited schools. Also, a number of states mandate that the plumbing training program be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the California Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Fresno CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate may indicate that students were dissatisfied with the program and quit. It might also mean that the teachers were not competent to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the trade, but also that it has the network of contacts to assist graduates acquire apprenticeships or employment in the Fresno CA area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught along with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Find out if the schools you are considering have referring partnerships with local Fresno CA plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by providing practical training, but it also provides employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Fresno CA plumbing contracting company if they can give you some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within driving distance of your Fresno CA home. Remember that if you decide to attend an out-of-state school, in addition to moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one instruction as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Talk with a few of the students and get their opinions regarding class sizes and instruction. Finally, talk to a few of the instructors and find out what their level of experience is in Fresno CA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you can only attend classes in the evening or on weekends near Fresno CA, confirm that the programs you are comparing provide those choices. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, ask what the policy is to make-up classes should you miss any due to work, illness or family responsibilities.

Find Out More About Fresno Plumbing Vocational Schools

Choose the Best Fresno Plumber Vocational School

Picking the ideal plumbing trade school will probably be the most important decision you will make to start your new profession. As we have covered in this article, there are several factors that you will need to examine and compare among the training programs you are looking at. It's a must that any plumber training program that you are considering includes a lot of hands-on instruction. Classes should be smaller in size and each student should have their personal equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the curriculum should be up-to-date and in-line with industry standards. Programs vary in duration and the kind of credential provided, so you will have to determine what length of program and credential will best fulfill your needs. Every training program offers unique possibilities for certification as well. Perhaps the best means to research your short list of schools is to visit each campus and speak with the faculty and students. Invest some time to monitor some classes. Inspect the campus and facilities. Make sure that you are confident that the school you pick is the ideal one for you. With the right training, effort and commitment, you can become a professional plumber in Fresno CA.