How to Enroll in the Right Plumber Course near Millbrae California

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Millbrae CA. But with numerous technical schools to choose from, just how do you go about making sure that you enroll in the ideal one? Especially because there are a number of factors to evaluate. For example, some prospective students will start by looking for schools that are nearby their home. After they have found a few that are within commuting distance, they will choose the one with the cheapest tuition. While cost and location are important, they are not the only factors that need to be considered. Also important are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and additional qualifiers should contribute toward your ultimate judgment when selecting a plumbing training school. We will address that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Millbrae CA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Millbrae CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Millbrae CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Millbrae CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Tech Schools

When you have made a decision to earn a certificate, diploma or degree, you can begin to focus your training options. Because there are so many plumbing vocational and trade schools in the Millbrae CA area, it's important to have a checklist of qualifications that each school must meet. The initial two that we discussed were location and the cost of tuition. And although both qualifiers may be crucial when making your selection, there are additional factors that need to be taken into account as well. Following is a checklist of those additional qualifiers that you will need to assess prior to selecting a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have attained either a regional or a national accreditation. They can attain Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Confirm that the Millbrae CA school and program are accredited by a U.S. Department of Education approved accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping ensure that you obtain a quality education, it may assist in acquiring financial assistance or student loans, which are often unavailable for non-accredited schools. Furthermore, many states require that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the California Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Millbrae CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A low completion rate may suggest that students were disappointed with the program and dropped out. It might also suggest that the instructors were not qualified to instruct the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist grads acquire apprenticeships or employment in the Millbrae CA area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught together with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Check if the schools you are reviewing have referring partnerships with local Millbrae CA plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also provides employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. If not, ask a local Millbrae CA plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your Millbrae CA home. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized training as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and experience the interaction between instructors and students. Talk with some of the students and get their comments concerning class sizes and instruction. Last, talk to a few of the teachers and find out what their level of experience is in Millbrae CA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Millbrae CA, confirm that the programs you are comparing offer those options. If you can only attend on a part-time basis, make sure that the school you select allows part-time enrollment. Finally, find out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About Millbrae Plumbing Trade Schools

Enroll in the Best Millbrae Plumbing Training School

Picking the best plumber trade school will probably be the most critical decision you will make to start your new career. As we have covered in this article, there are several factors that you will need to evaluate and compare between the schools you are reviewing. It's a necessity that any plumber training that you are examining includes a good deal of hands-on instruction. Classes need to be smaller in size and every student should have their personal equipment to train with. Classroom education needs to provide a real-world perspective, and the curriculum should be current and in-line with industry standards. Programs vary in duration and the type of credential provided, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Each training program offers unique options for certification as well. Perhaps the best approach to research your final list of schools is to visit each campus and talk with the faculty and students. Take the time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the best one for you. With the right training, hard work and dedication, you can become a professional plumber in Millbrae CA.