Home >> California >> National City >> Becoming A Plumber


Get Free Info on Plumber Training Courses National City CA 91902


How to Find the Right Plumbing Trade School near National City California

National City California plumber replacing kitchen sink faucetThe first step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near National City CA. But with numerous technical schools to choose from, just how do you undertake making sure that you enroll in the right one? Particularly since there are so many points to consider. For example, some potential students will commence by looking for schools that are close to their residence. After they have located a few that are within driving range, they will decide on the one with the most affordable tuition. Even though location and cost are important, they are not the only things that must be examined. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should help mold your ultimate decision when choosing a plumber training school. We will cover that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

National City California plumbing contractor repairing water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local National City CA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of National City CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in National City CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near National City CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Training Schools

National City California plumber repairing water heater

When you have made a decision to earn a diploma, certificate or degree, you can start to focus your training options. Because there are numerous plumbing trade and vocational schools in the National City CA area, it's essential to have a checklist of criteria that each program must meet. The first two that we talked about were location and the cost of tuition. And although both qualifiers may be critical when making your decision, there are other factors that must be taken into account as well. Below is a checklist of those additional qualifications that you will need to research prior to enrolling in a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Confirm that the National City CA program and school are accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a superior education, it can assist in acquiring financial aid or student loans, which are frequently not available for non-accredited programs. Furthermore, a number of states mandate that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the California Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of National City CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate could signify that students were dissatisfied with the course and dropped out. It might also signify that the instructors were not competent to train the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the industry, but also that it has the network of contacts to assist graduates obtain apprenticeships or jobs in the National City CA area.

Are Apprenticeship Programs Sponsored?  Most plumber trade programs are taught together with an internship or an apprenticeship program. Those participating vocational and trade programs will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Check if the schools you are considering have working relationships with local National City CA plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also provides job opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. If not, ask a local National City CA plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to relocate, the school must be within commuting distance of your National City CA residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on some of the classes so that you can see how big they are and witness first hand the interaction between students and instructors. Talk with some of the students and get their feedback concerning class sizes and instruction. Finally, speak to some of the teachers and find out what their level of experience is in National City CA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are assessing are flexible enough to handle your needs. If you can only go to classes at night or on weekends near National City CA, verify that the schools you are considering offer those choices. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Additionally, find out what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Get More Info About National City Plumber Trade Schools

Enroll in the Best National City Plumber Training School

Choosing the ideal plumbing training program will probably be the most important decision you will make to start your new career. As we have addressed in this article, there are many things that you will need to assess and compare among the training programs you are reviewing. It's a necessity that any plumbing training that you are considering includes a lot of hands-on instruction. Classes need to be smaller in size and each student must have their personal equipment to train with. Classroom instruction should offer a real-world context, and the course of study should be current and in-line with industry standards. Training programs differ in length and the kind of credential offered, so you will have to decide what length of program and degree or certificate will best serve your needs. Every program offers different possibilities for certification as well. Probably the best means to research your short list of schools is to visit each campus and talk with the students and instructors. Take the time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the program you decide on is the right one for you. With the right training, hard work and dedication, you can become a professional plumber in National City CA.