How to Enroll in the Best Plumber Training School near Richmond California

The first step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Richmond CA. But with so many vocational schools to pick from, just how do you tackle making sure that you enroll in the right one? Particularly since there are a number of points to consider. For example, many prospective students will commence by looking for schools that are close to their residence. When they have found some that are within commuting range, they will pick the one with the cheapest tuition. While location and cost are important, they are not the only factors that must be considered. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifiers should help mold your final decision when picking a plumbing trade school. We will discuss that checklist in greater detail later in this article. But first, let's talk a little bit about becoming a plumber and the educational choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Richmond CA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Richmond CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Richmond CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Richmond CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Training Schools

Once you have made a decision to obtain a certificate, diploma or degree, you can start to focus your school options. Since there are numerous plumbing tech and trade schools in the Richmond CA area, it's essential to have a checklist of qualifications that each school must satisfy. The initial two that we discussed were location and the cost of tuition. And even though both qualifiers may be crucial when making your decision, there are additional factors that need to be taken into account also. Below is a checklist of those additional qualifications that you will need to assess before selecting a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing technical programs have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Verify that the Richmond CA program is accredited by a U.S. Department of Education acknowledged accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive an excellent education, it may assist in obtaining financial aid or student loans, which are in many cases not available for non-accredited programs. Furthermore, a number of states mandate that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the California Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Richmond CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate may indicate that students were unhappy with the course and quit. It may also signify that the instructors were not qualified to instruct the students. It's also essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to help graduates acquire apprenticeships or employment in the Richmond CA area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Ask if the schools you are reviewing have referring relationships with local Richmond CA plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by supplying practical training, but it also furnishes job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. If not, ask a local Richmond CA plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are able to relocate, the school must be within driving distance of your Richmond CA home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much personalized instruction as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can observe how big they are and experience the interaction between instructors and students. Speak to a few of the students and get their comments regarding class sizes and instruction. Last, speak with a few of the instructors and find out what their level of experience is in Richmond CA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you are only able to attend classes in the evening or on weekends near Richmond CA, verify that the schools you are comparing provide those choices. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Additionally, ask what the protocol is to make-up classes should you miss any because of work, sickness or family responsibilities.

Find Out More About Richmond Plumber Trade Schools

Pick the Best Richmond Plumbing Trade School

Selecting the ideal plumbing training program will undoubtedly be the most important decision you will make to begin your new trade. As we have covered in this article, there are a number of things that you will need to assess and compare between the schools you are reviewing. It's a prerequisite that any plumber training program that you are reviewing includes a considerable amount of hands-on training. Classes need to be small in size and each student must have their own equipment to train with. Classroom education needs to provide a real-world perspective, and the training program should be up-to-date and in-line with industry standards. Programs vary in duration and the type of credential provided, so you will need to decide what length of program and degree or certificate will best serve your needs. Each training program provides unique options for certification as well. Perhaps the best way to research your short list of schools is to visit each campus and talk with the students and instructors. Invest some time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you choose is the ideal one for you. With the proper training, hard work and commitment, you can become a professional plumber in Richmond CA.