Home >> California >> Stockton >> Plumber Training


Request Free Info on Plumbing Training Stockton CA 95201


How to Choose the Right Plumber Training near Stockton California

Stockton California plumbing contractor fixing kitchen faucetThe initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Stockton CA. But with numerous vocational schools to choose from, just how do you approach making sure that you enroll in the ideal one? Especially since there are a number of variables to consider. For instance, many potential students will begin by searching for schools that are close to their residence. After they have found several that are within commuting range, they will choose the one with the lowest tuition. Even though location and cost are of importance, they are not the sole qualifications that must be considered. Also important are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifications should influence your ultimate decision when selecting a plumber training school. We will talk about that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Stockton California plumbing contractor fixing water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Stockton CA plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Stockton CA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Stockton CA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Stockton CA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Stockton California plumbing contractor replacing hot water heater

Now that you have made a decision to earn a diploma, certificate or degree, you can begin to focus your training options. Since there are numerous plumbing trade and vocational schools in the Stockton CA region, it's essential to have a checklist of qualifications that each program must satisfy. The first 2 that we discussed were location and the cost of tuition. And even though both qualifiers may be crucial when making your selection, there are other factors that need to be taken into account as well. Following is a checklist of those added qualifications that you will need to analyze before selecting a plumber tech school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have earned either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Make sure that the Stockton CA program is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you acquire a quality education, it may help in obtaining financial assistance or student loans, which are often unavailable for non-accredited schools. Additionally, a number of states require that the plumbing training program be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the California Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Stockton CA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A lower completion rate may indicate that students were dissatisfied with the program and quit. It could also signify that the instructors were not competent to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist grads obtain apprenticeships or jobs in the Stockton CA area.

Are Apprenticeship Programs Sponsored?  Most plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Find out if the schools you are reviewing have working relationships with local Stockton CA plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by providing practical training, but it also provides employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be instructed on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Stockton CA plumbing contractor if they can give you some tips.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your Stockton CA home. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can monitor some of the classes so that you can see how big they are and witness first hand the interaction between students and instructors. Talk to a few of the students and get their feedback regarding class sizes and instruction. Finally, talk to a few of the teachers and learn what their level of experience is in Stockton CA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you are only able to go to classes at night or on weekends near Stockton CA, check that the schools you are considering provide those choices. If you can only attend on a part-time basis, make certain that the school you select allows part-time enrollment. Additionally, check out what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.

Find Out More About Stockton Plumber Training Schools

Enroll in the Best Stockton Plumber Vocational School

Choosing the best plumber trade school will undoubtedly be the most critical decision you will make to launch your new profession. As we have discussed in this article, there are many factors that you will need to assess and compare between the training programs you are considering. It's a necessity that any plumbing tech school that you are reviewing includes a considerable amount of hands-on training. Classes should be small in size and every student must have their personal equipment to train with. Classroom instruction needs to offer a real-world context, and the training program should be up-to-date and in-line with industry standards. Training programs differ in length and the kind of credential offered, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Every training program offers unique possibilities for certification as well. Probably The ideal means to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the right one for you. With the proper training, hard work and dedication, you can become a professional plumber in Stockton CA.