How to Find the Best Plumber Trade School near Erie Colorado

The initial step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Erie CO. But with numerous vocational schools to choose from, just how do you go about making sure that you enroll in the right one? Especially because there are so many points to consider. For instance, many prospective students will begin by looking for schools that are close to their residence. After they have found some that are within driving range, they will decide on the one with the most affordable tuition. Although location and cost are significant, they are not the only factors that must be evaluated. Also critical are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and additional qualifications should help mold your final judgment when selecting a plumbing trade school. We will discuss that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the training choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Erie CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Erie CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Erie CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Erie CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Technical Schools

Now that you have made a decision to earn a certificate, diploma or degree, you can start to focus your training options. Considering that there are numerous plumbing tech and trade schools in the Erie CO area, it's important to have a checklist of criteria that each program must satisfy. The first 2 that we mentioned were location and the cost of tuition. And although both qualifiers may be critical when making your determination, there are other variables that must be considered also. Below is a checklist of those added qualifications that you will need to assess before selecting a plumber technical school.

Is the Plumbing School Accredited?  Numerous plumbing vocational programs have acquired either a regional or a national accreditation. They may attain Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Verify that the Erie CO program is accredited by a U.S. Department of Education acknowledged accrediting organization, for instance the Accreditation Board for Engineering and Technology. Along with helping ensure that you receive a superior education, it can help in obtaining financial aid or student loans, which are frequently not available for non-accredited programs. Also, many states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Colorado Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Erie CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate could signify that students were disappointed with the course and dropped out. It may also signify that the instructors were not qualified to train the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but also that it has the network of contacts to help graduates obtain apprenticeships or employment in the Erie CO area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and vocational programs will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Check if the schools you are considering have referring partnerships with local Erie CO plumbers or plumbing contractors. An apprenticeship not only provides a rewarding experience by providing practical training, but it also provides employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Erie CO plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you are willing to relocate, the school must be within commuting distance of your Erie CO residence. Remember that if you decide to enroll in an out-of-state school, in addition to moving costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized training as possible, which can be challenging in larger classes. Ask if you can monitor some of the classes so that you can see how large they are and experience the interaction between students and instructors. Speak to several of the students and get their comments regarding class sizes and instruction. Finally, speak with a few of the instructors and find out what their level of experience is in Erie CO and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Erie CO, confirm that the programs you are reviewing offer those choices. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any due to work, sickness or family emergencies.

Find Out More About Erie Plumber Training Schools

Pick the Best Erie Plumbing Vocational School

Picking the ideal plumbing training program will undoubtedly be the most critical decision you will make to launch your new profession. As we have covered in this article, there are a number of factors that you will need to assess and compare between the training programs you are reviewing. It's a prerequisite that any plumbing training that you are examining includes a good deal of hands-on instruction. Classes should be small in size and each student should have their personal equipment to train with. Classroom education should provide a real-world frame of reference, and the course of study should be up-to-date and conform with industry standards. Courses differ in length and the type of credential provided, so you will need to determine what length of program and certificate or degree will best fulfill your needs. Each training program provides unique options for certification as well. Probably The ideal way to research your short list of schools is to go to each campus and talk with the students and faculty. Invest some time to attend a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Erie CO.