How to Find the Best Plumbing Course near Fountain Colorado

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Fountain CO. But with so many technical schools to choose from, just how do you undertake making certain that you enroll in the ideal one? Particularly because there are a number of points to consider. For example, many prospective students will start by looking for schools that are nearby their home. Once they have located a few that are within commuting range, they will select the one with the cheapest tuition. Although cost and location are significant, they are not the sole things that need to be evaluated. Also critical are the accreditation and reputations of the schools, as well as their graduation and job placement rates. These and other qualifiers should contribute toward your final judgment when selecting a plumber trade school. We will address that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training options that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Fountain CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Fountain CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Fountain CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Fountain CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Tech Schools

Once you have made a decision to earn a diploma, certificate or degree, you can begin to focus your school options. Considering that there are numerous plumbing trade and vocational schools in the Fountain CO region, it's imperative to have a checklist of qualifications that each school must satisfy. The initial two that we talked about were location and tuition expense. And while both qualifiers may be crucial when making your decision, there are additional variables that must be considered also. Below is a checklist of those added qualifications that you will need to analyze before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have attained either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Make certain that the Fountain CO school and program are accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping ensure that you acquire an excellent education, it may assist in securing financial assistance or student loans, which are in many cases not available for non-accredited programs. Also, some states require that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Colorado Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Fountain CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate might indicate that students were disappointed with the course and quit. It could also suggest that the instructors were not qualified to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist students obtain apprenticeships or employment in the Fountain CO area.

Are Apprenticeship Programs Sponsored?  A large number of plumber technical programs are taught along with an internship or an apprenticeship program. Those participating trade and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Find out if the schools you are reviewing have referring partnerships with local Fountain CO plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be using in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. If not, ask a local Fountain CO plumbing company if they can give you some pointers.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Fountain CO residence. Take note that if you decide to enroll in an out-of-state school, in addition to relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized training as possible, which can be challenging in bigger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and witness first hand the interaction between instructors and students. Talk with some of the students and get their opinions relating to class sizes and instruction. Last, talk to a few of the teachers and learn what their level of experience is in Fountain CO and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you can only attend classes at night or on weekends near Fountain CO, verify that the programs you are looking at provide those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Also, check out what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Find Out More About Fountain Plumber Vocational Schools

Choose the Best Fountain Plumbing Training School

Picking the best plumber training program will probably be the most important decision you will make to begin your new trade. As we have discussed in this article, there are a number of things that you will need to evaluate and compare among the training programs you are looking at. It's a must that any plumber tech school that you are assessing includes a good deal of hands-on training. Classes should be smaller in size and each student should have their own equipment to train with. Classroom teaching should offer a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Training programs vary in duration and the kind of credential offered, so you will need to ascertain what length of program and degree or certificate will best serve your needs. Every program offers unique possibilities for certification as well. Probably the best way to research your final list of schools is to visit each campus and speak with the students and faculty. Invest some time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the program you choose is the ideal one for you. With the right training, effort and commitment, you can become a professional plumber in Fountain CO.