How to Find the Right Plumbing Trade School near Grand Junction Colorado

The first step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Grand Junction CO. But with so many vocational schools to select from, just how do you go about making certain that you enroll in the best one? Especially because there are a number of factors to evaluate. For example, many potential students will start by looking for schools that are nearby their residence. Once they have located several that are within commuting range, they will decide on the one with the lowest tuition. Although cost and location are of importance, they are not the only things that need to be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should contribute toward your ultimate judgment when picking a plumber trade school. We will address that checklist in greater detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Grand Junction CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Grand Junction CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Grand Junction CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Grand Junction CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Vocational Schools

When you have made a decision to obtain a diploma, certificate or degree, you can begin to focus your training options. Considering that there are so many plumbing tech and trade schools in the Grand Junction CO region, it's important to have a checklist of qualifications that each program must satisfy. The initial two that we talked about were location and the cost of tuition. And although both qualifiers may be crucial when making your decision, there are other variables that must be taken into account also. Following is a checklist of those additional qualifications that you will need to analyze before selecting a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have received either a regional or a national accreditation. They can attain Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Make certain that the Grand Junction CO program and school are accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire an excellent education, it can assist in securing financial aid or student loans, which are in many cases unavailable for non-accredited programs. Also, many states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Colorado Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Grand Junction CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A low completion rate might suggest that students were dissatisfied with the course and quit. It might also indicate that the teachers were not qualified to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the industry, but also that it has the network of contacts to assist grads acquire apprenticeships or jobs in the Grand Junction CO area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Ask if the schools you are reviewing have working partnerships with local Grand Junction CO plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by providing practical training, but it also supplies job opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be working with on the job. If you are already in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be expecting. If not, ask a local Grand Junction CO plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your Grand Junction CO residence. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized training as possible, which can be difficult in bigger classes. Ask if you can monitor a few of the classes so that you can observe how big they are and witness first hand the interaction between instructors and students. Talk to several of the students and get their feedback regarding class sizes and instruction. Last, speak with a few of the teachers and find out what their level of experience is in Grand Junction CO and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are assessing are flexible enough to meet your needs. If you are only able to attend classes in the evening or on weekends near Grand Junction CO, check that the schools you are reviewing offer those choices. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Also, check out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About Grand Junction Plumber Trade Schools

Enroll in the Right Grand Junction Plumber Training School

Selecting the right plumber trade school will undoubtedly be the most important decision you will make to start your new profession. As we have addressed in this article, there are a number of factors that you will need to evaluate and compare between the schools you are reviewing. It's a prerequisite that any plumber training program that you are examining includes a considerable amount of hands-on training. Classes should be smaller in size and every student should have their own equipment to train with. Classroom teaching needs to provide a real-world context, and the training program should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential offered, so you will need to ascertain what length of program and certificate or degree will best serve your needs. Each training program provides different options for certification as well. Probably The ideal way to research your final list of schools is to check out each campus and talk with the faculty and students. Invest some time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you decide on is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Grand Junction CO.