How to Find the Right Plumber Training Course near Grand Junction Colorado

The initial step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Grand Junction CO. But with so many vocational schools to pick from, just how do you go about making certain that you enroll in the best one? Particularly since there are so many factors to examine. For instance, some potential students will commence by looking for schools that are nearby their residence. Once they have located a few that are within commuting range, they will pick the one with the lowest tuition. Even though location and cost are of importance, they are not the sole factors that must be evaluated. Also important are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifications should influence your ultimate decision when selecting a plumber training school. We will talk about that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Grand Junction CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Grand Junction CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Grand Junction CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Grand Junction CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Tech Schools

Now that you have decided to earn a diploma, certificate or degree, you can start to narrow down your training options. Since there are so many plumbing tech and trade schools in the Grand Junction CO area, it's essential to have a checklist of qualifications that each school must satisfy. The first 2 that we talked about were location and the cost of tuition. And even though both qualifiers may be critical when making your decision, there are additional variables that need to be taken into account as well. Below is a checklist of those additional qualifications that you will need to analyze before choosing a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing trade programs have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Confirm that the Grand Junction CO school and program are accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping ensure that you receive a superior education, it may assist in securing financial aid or student loans, which are often unavailable for non-accredited schools. Also, many states mandate that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Colorado Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Grand Junction CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate could indicate that students were dissatisfied with the course and dropped out. It could also mean that the teachers were not qualified to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to help graduates secure apprenticeships or jobs in the Grand Junction CO area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught along with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Ask if the schools you are reviewing have working relationships with local Grand Junction CO plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also provides job opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Grand Junction CO plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Grand Junction CO residence. Take note that if you decide to enroll in an out-of-state school, in addition to moving costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized training as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Speak to a few of the students and get their feedback concerning class sizes and instruction. Finally, speak to some of the teachers and learn what their level of experience is in Grand Junction CO and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you are only able to attend classes at night or on weekends near Grand Junction CO, confirm that the programs you are comparing provide those options. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, sickness or family emergencies.

Find Out More About Grand Junction Plumbing Vocational Schools

Choose the Best Grand Junction Plumbing Vocational School

Selecting the right plumber trade school will probably be the most critical decision you will make to begin your new career. As we have covered in this article, there are a number of factors that you will need to examine and compare among the schools you are reviewing. It's a necessity that any plumbing training that you are evaluating includes a lot of hands-on instruction. Classes need to be smaller in size and every student should have their personal equipment to train with. Classroom teaching should offer a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs vary in length and the type of credential provided, so you will have to determine what length of program and credential will best serve your needs. Every program provides unique options for certification as well. Probably The ideal way to research your short list of schools is to check out each campus and speak with the teachers and students. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you decide on is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Grand Junction CO.