How to Find the Best Plumber Course near Longmont Colorado

The initial step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near Longmont CO. But with numerous technical schools to select from, just how do you go about making certain that you enroll in the ideal one? Especially since there are a number of factors to evaluate. For example, some potential students will begin by searching for schools that are close to their residence. When they have located several that are within commuting range, they will choose the one with the least expensive tuition. Even though location and cost are of importance, they are not the sole factors that should be examined. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifiers should help mold your final judgment when choosing a plumbing trade school. We will address that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Longmont CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Longmont CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Longmont CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Longmont CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Now that you have decided to earn a certificate, diploma or degree, you can start to focus your training options. Because there are numerous plumbing tech and trade schools in the Longmont CO area, it's essential to have a checklist of criteria that each program must meet. The first two that we talked about were location and the cost of tuition. And although both qualifiers may be critical when making your determination, there are other variables that must be considered also. Following is a checklist of those added qualifiers that you will need to research prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Confirm that the Longmont CO school and program are accredited by a U.S. Department of Education approved accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you get a quality education, it can help in obtaining financial aid or student loans, which are often not available for non-accredited schools. Additionally, some states require that the plumbing training program be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Colorado Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Longmont CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate may suggest that students were unhappy with the course and quit. It may also suggest that the teachers were not qualified to train the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist students acquire apprenticeships or employment in the Longmont CO area.

Are Apprenticeship Programs Sponsored?  Numerous plumber trade programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Ask if the schools you are considering have referring relationships with local Longmont CO plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by providing hands-on training, but it also supplies job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Longmont CO plumbing contractor if they can give you some suggestions.

Where is the School Located?  Unless you are willing to move, the school must be within driving distance of your Longmont CO residence. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how large they are and experience the interaction between instructors and students. Speak with a few of the students and get their comments concerning class sizes and instruction. Finally, speak with a few of the teachers and learn what their level of experience is in Longmont CO and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you can only go to classes in the evening or on weekends near Longmont CO, confirm that the schools you are reviewing offer those options. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, ask what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Longmont Plumber Training Schools

Pick the Right Longmont Plumbing Trade School

Selecting the right plumbing training program will undoubtedly be the most critical decision you will make to launch your new profession. As we have covered in this article, there are many things that you will need to examine and compare between the schools you are reviewing. It's a must that any plumbing training program that you are assessing includes a good deal of hands-on training. Classes should be smaller in size and every student must have their own equipment to train with. Classroom education should provide a real-world frame of reference, and the curriculum should be current and in-line with industry standards. Programs vary in duration and the kind of credential offered, so you will have to ascertain what length of program and certificate or degree will best fulfill your needs. Every program provides unique possibilities for certification as well. Probably the best way to research your short list of schools is to check out each campus and speak with the teachers and students. Take the time to monitor some classes. Tour the campus and facilities. Make certain that you are confident that the training program you pick is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Longmont CO.