How to Find the Best Plumbing Tech School near Parker Colorado

The initial step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Parker CO. But with numerous technical schools to choose from, just how do you approach making sure that you enroll in the right one? Especially because there are so many points to consider. For example, many students will commence by searching for schools that are close to their home. When they have identified a few that are within commuting range, they will select the one with the cheapest tuition. Even though location and cost are important, they are not the only factors that must be examined. Also important are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and additional qualifiers should influence your ultimate judgment when selecting a plumber training school. We will address that checklist in more detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Parker CO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Parker CO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Parker CO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Parker CO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Vocational Schools

Now that you have decided to earn a certificate, diploma or degree, you can begin to focus your training options. Considering that there are numerous plumbing vocational and trade schools in the Parker CO region, it's imperative to have a checklist of criteria that each program must meet. The first 2 that we talked about were location and the cost of tuition. And although both qualifiers may be important when making your selection, there are additional factors that must be taken into account as well. Below is a checklist of those added qualifications that you will need to research prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing technical programs have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make certain that the Parker CO program is accredited by a U.S. Department of Education acknowledged accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a quality education, it can assist in obtaining financial assistance or student loans, which are often not available for non-accredited schools. Also, some states require that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Colorado Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Parker CO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate might suggest that students were unhappy with the course and quit. It could also indicate that the teachers were not competent to train the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist graduates secure apprenticeships or employment in the Parker CO area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught in conjunction with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Ask if the schools you are reviewing have referring partnerships with local Parker CO plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying practical training, but it also furnishes job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. If not, ask a local Parker CO plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you are able to move, the school must be within driving distance of your Parker CO home. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in bigger classes. Ask if you can monitor a few of the classes so that you can observe how large they are and experience the interaction between instructors and students. Speak with some of the students and get their comments relating to class sizes and instruction. Finally, speak to a few of the instructors and learn what their level of experience is in Parker CO and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Parker CO, check that the schools you are looking at provide those options. If you can only attend on a part-time basis, make sure that the school you select allows part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, illness or family emergencies.

Get More Info About Parker Plumber Vocational Schools

Choose the Right Parker Plumbing Vocational School

Choosing the ideal plumbing trade school will probably be the most important decision you will make to begin your new career. As we have covered in this article, there are many factors that you will need to examine and compare between the training programs you are looking at. It's a must that any plumbing training program that you are evaluating includes a considerable amount of hands-on instruction. Classes need to be smaller in size and each student should have their personal equipment to train with. Classroom education needs to offer a real-world frame of reference, and the training program should be current and conform with industry standards. Courses differ in length and the kind of credential provided, so you will need to determine what length of program and degree or certificate will best serve your needs. Each program offers unique possibilities for certification also. Perhaps the best way to research your short list of schools is to visit each campus and talk with the faculty and students. Invest some time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the program you decide on is the ideal one for you. With the proper training, effort and dedication, you can become a professional plumber in Parker CO.