Home >> Florida >> Fort Myers >> Plumbing Schools


Request Free Info on Plumbing Training Fort Myers FL 33900


How to Choose the Best Plumber Technical School near Fort Myers Florida

Fort Myers Florida plumbing contractor replacing kitchen faucetThe first step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Fort Myers FL. But with numerous technical schools to choose from, just how do you undertake making sure that you enroll in the ideal one? Especially since there are so many points to consider. For instance, many prospective students will start by searching for schools that are close to their home. After they have found a few that are within commuting distance, they will decide on the one with the cheapest tuition. While cost and location are important, they are not the sole things that should be evaluated. Also important are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and other qualifiers should influence your final decision when picking a plumber training school. We will discuss that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are accessible.

Becoming a Plumber

Fort Myers Florida plumber repairing water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Fort Myers FL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Fort Myers FL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Fort Myers FL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Fort Myers FL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Tech Schools

Fort Myers Florida plumbing contractor replacing hot water heater

When you have made a decision to earn a certificate, diploma or degree, you can begin to narrow down your training options. Considering that there are numerous plumbing tech and trade schools in the Fort Myers FL region, it's essential to have a checklist of qualifications that each school must meet. The first two that we discussed were location and tuition expense. And even though both qualifiers may be critical when making your selection, there are additional variables that need to be taken into account as well. Below is a checklist of those additional qualifications that you will need to research prior to enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have earned either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Make certain that the Fort Myers FL school and program are accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a superior education, it can help in securing financial assistance or student loans, which are often unavailable for non-accredited schools. Additionally, a number of states mandate that the plumbing training course be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Florida Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Fort Myers FL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate could suggest that students were unhappy with the course and dropped out. It may also signify that the teachers were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which may result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the industry, but also that it has the network of contacts to help students secure apprenticeships or jobs in the Fort Myers FL area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught together with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Ask if the schools you are reviewing have referring partnerships with local Fort Myers FL plumbers or plumbing professionals. An apprenticeship not only offers a valuable experience by furnishing practical training, but it also supplies employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. If not, ask a local Fort Myers FL plumbing company if they can provide some suggestions.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Fort Myers FL residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a few of the classes so that you can observe how large they are and experience the interaction between students and instructors. Talk with a few of the students and get their feedback regarding class sizes and instruction. Finally, talk to some of the teachers and learn what their level of experience is in Fort Myers FL and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you can only attend classes in the evening or on weekends near Fort Myers FL, verify that the schools you are looking at provide those options. If you can only attend on a part-time basis, make certain that the school you select offers part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Learn More About Fort Myers Plumber Trade Schools

Choose the Right Fort Myers Plumber Vocational School

Picking the ideal plumber training program will probably be the most important decision you will make to start your new trade. As we have discussed in this article, there are many things that you will need to examine and compare among the schools you are considering. It's a prerequisite that any plumbing tech school that you are assessing includes a good deal of hands-on instruction. Classes should be small in size and every student must have their personal equipment to train with. Classroom education should provide a real-world perspective, and the course of study should be up-to-date and conform with industry standards. Training programs differ in duration and the type of credential offered, so you will have to decide what length of program and degree or certificate will best fulfill your needs. Each training program provides unique possibilities for certification also. Probably The ideal means to research your short list of schools is to visit each campus and speak with the faculty and students. Take the time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the school you choose is the right one for you. With the right training, effort and dedication, you can become a professional plumber in Fort Myers FL.