How to Select the Best Plumbing Technical School near Albany Georgia

The initial step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Albany GA. But with numerous technical schools to pick from, just how do you undertake making sure that you enroll in the right one? Particularly since there are a number of points to consider. For example, some students will start by looking for schools that are close to their home. When they have identified several that are within commuting distance, they will choose the one with the cheapest tuition. While cost and location are important, they are not the sole things that should be evaluated. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and additional qualifiers should contribute toward your ultimate judgment when choosing a plumber trade school. We will discuss that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the training options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Albany GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Albany GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Albany GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Albany GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Tech Schools

Once you have made a decision to earn a diploma, certificate or degree, you can begin to narrow down your training options. Because there are so many plumbing tech and trade schools in the Albany GA region, it's imperative to have a checklist of qualifications that each program must meet. The initial 2 that we talked about were location and tuition expense. And even though both qualifiers may be critical when making your decision, there are other variables that need to be taken into account as well. Below is a checklist of those additional qualifiers that you will need to analyze before choosing a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing technical programs have acquired either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Confirm that the Albany GA program and school are accredited by a U.S. Department of Education approved accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you get an excellent education, it can assist in acquiring financial assistance or student loans, which are often unavailable for non-accredited programs. Furthermore, some states require that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Albany GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the program. A low completion rate could indicate that students were unhappy with the program and dropped out. It might also signify that the instructors were not competent to train the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to help graduates secure apprenticeships or employment in the Albany GA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught along with an internship or an apprenticeship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Find out if the schools you are comparing have working partnerships with local Albany GA plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be looking for. If not, ask a local Albany GA plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Albany GA residence. Remember that if you decide to attend an out-of-state school, in addition to moving costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and experience the interaction between students and instructors. Speak with some of the students and get their opinions concerning class sizes and instruction. Last, speak with a few of the instructors and find out what their level of experience is in Albany GA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Albany GA, confirm that the schools you are considering offer those choices. If you can only attend on a part-time basis, be sure that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any due to work, illness or family issues.

Learn More About Albany Plumbing Trade Schools

Choose the Best Albany Plumber Training School

Picking the best plumbing trade school will undoubtedly be the most important decision you will make to launch your new profession. As we have discussed in this article, there are many factors that you will need to evaluate and compare between the training programs you are reviewing. It's a necessity that any plumber tech school that you are reviewing includes a good deal of hands-on training. Classes need to be small in size and every student must have their own equipment to train with. Classroom education should provide a real-world frame of reference, and the curriculum should be current and in-line with industry standards. Courses differ in length and the kind of credential provided, so you will have to determine what length of program and credential will best satisfy your needs. Each program offers different possibilities for certification as well. Probably the best approach to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the school you pick is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Albany GA.