How to Pick the Best Plumber School near Athens Georgia

The first step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Athens GA. But with so many technical schools to select from, just how do you undertake making sure that you enroll in the right one? Especially since there are a number of factors to evaluate. For instance, many students will start by searching for schools that are close to their residence. After they have found a few that are within commuting range, they will pick the one with the cheapest tuition. While location and cost are significant, they are not the only things that need to be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifications should influence your final judgment when choosing a plumbing trade school. We will talk about that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training options that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Athens GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Athens GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Athens GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Athens GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Vocational Schools

Now that you have decided to obtain a diploma, certificate or degree, you can begin to focus your school options. Since there are so many plumbing trade and vocational schools in the Athens GA region, it's important to have a checklist of qualifications that each program must satisfy. The initial 2 that we talked about were location and tuition expense. And although both qualifiers may be critical when making your selection, there are additional variables that need to be considered also. Following is a checklist of those added qualifiers that you will need to research before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Verify that the Athens GA program is accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a quality education, it can assist in acquiring financial aid or student loans, which are often not available for non-accredited programs. Furthermore, some states mandate that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Athens GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate might suggest that students were unhappy with the program and dropped out. It may also suggest that the instructors were not competent to instruct the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but also that it has the network of contacts to help grads secure apprenticeships or jobs in the Athens GA area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Find out if the schools you are reviewing have working relationships with local Athens GA plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by providing hands-on training, but it also furnishes job opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be using in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be looking for. If not, ask a local Athens GA plumbing company if they can provide some tips.

Where is the School Located?  Unless you can move, the school needs to be within driving distance of your Athens GA residence. Take note that if you decide to enroll in an out-of-state school, besides the added relocation costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how big they are and witness first hand the interaction between students and teachers. Speak with several of the students and get their comments regarding class sizes and instruction. Finally, speak to some of the instructors and find out what their level of experience is in Athens GA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you can only go to classes in the evening or on weekends near Athens GA, confirm that the schools you are looking at provide those choices. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Learn More About Athens Plumber Vocational Schools

Pick the Best Athens Plumber Training School

Picking the best plumber training program will undoubtedly be the most critical decision you will make to begin your new trade. As we have discussed in this article, there are several factors that you will need to assess and compare among the schools you are reviewing. It's a prerequisite that any plumbing tech school that you are assessing includes a good deal of hands-on training. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom education needs to provide a real-world frame of reference, and the curriculum should be current and in-line with industry standards. Training programs vary in duration and the type of credential provided, so you will need to ascertain what length of program and certificate or degree will best fulfill your needs. Every training program offers different options for certification as well. Perhaps The ideal approach to research your final list of schools is to visit each campus and talk with the teachers and students. Take the time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the program you select is the right one for you. With the proper training, effort and dedication, you can become a professional plumber in Athens GA.