How to Select the Best Plumber Trade School near Atlanta Georgia

The first step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Atlanta GA. But with numerous technical schools to pick from, just how do you go about making sure that you enroll in the best one? Especially because there are a number of points to examine. For example, many potential students will begin by looking for schools that are close to their residence. After they have found several that are within driving range, they will choose the one with the most affordable tuition. Even though location and cost are of importance, they are not the only things that must be examined. Also important are the reputations of the schools, their accreditation, along with their graduation and job placement rates. These and additional qualifications should influence your final judgment when picking a plumber training school. We will talk about that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the training choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Atlanta GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Atlanta GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Atlanta GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Atlanta GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Tech Schools

When you have decided to obtain a certificate, diploma or degree, you can begin to refine your training options. Because there are numerous plumbing vocational and trade schools in the Atlanta GA area, it's important to have a checklist of criteria that each school must satisfy. The initial two that we discussed were location and tuition expense. And although both qualifiers may be important when making your selection, there are other factors that must be taken into account as well. Below is a checklist of those added qualifications that you will need to research prior to selecting a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing trade programs have acquired either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Make certain that the Atlanta GA program is accredited by a U.S. Department of Education recognized accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping guarantee that you get an excellent education, it may assist in obtaining financial assistance or student loans, which are frequently not available for non-accredited programs. Furthermore, a number of states mandate that the plumbing training course be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Atlanta GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A lower completion rate could indicate that students were dissatisfied with the course and dropped out. It might also suggest that the instructors were not competent to train the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but also that it has the network of contacts to assist students obtain apprenticeships or employment in the Atlanta GA area.

Are Apprenticeship Programs Sponsored?  Many plumber technical programs are taught along with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Check if the schools you are considering have working partnerships with local Atlanta GA plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides employment opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be looking for. Otherwise, ask a local Atlanta GA plumbing company if they can provide some tips.

Where is the School Located?  Unless you can move, the school must be within commuting distance of your Atlanta GA home. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a few of the classes so that you can see how large they are and witness first hand the interaction between teachers and students. Speak with a few of the students and get their feedback concerning class sizes and instruction. Finally, talk with some of the teachers and find out what their level of experience is in Atlanta GA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Atlanta GA, check that the programs you are reviewing offer those options. If you can only attend on a part-time basis, be sure that the school you select allows part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Get More Info About Atlanta Plumber Vocational Schools

Pick the Right Atlanta Plumbing Trade School

Choosing the ideal plumbing training program will undoubtedly be the most important decision you will make to launch your new trade. As we have addressed in this article, there are many things that you will need to evaluate and compare between the training programs you are considering. It's a prerequisite that any plumbing training program that you are considering includes a lot of hands-on training. Classes should be small in size and every student must have their personal equipment to train with. Classroom education needs to provide a real-world frame of reference, and the curriculum should be current and conform with industry standards. Courses differ in length and the kind of credential provided, so you will have to decide what length of program and degree or certificate will best satisfy your needs. Each training program provides different possibilities for certification also. Perhaps The ideal approach to research your final list of schools is to visit each campus and talk with the teachers and students. Take the time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you select is the ideal one for you. With the proper training, effort and dedication, you can become a professional plumber in Atlanta GA.