How to Choose the Best Plumber Tech School near Canton Georgia

The initial step to becoming a plumbing contractor or tradesman is enrolling in a plumbing trade school near Canton GA. But with numerous vocational schools to select from, just how do you approach making sure that you enroll in the right one? Particularly because there are a number of points to consider. For example, some potential students will start by searching for schools that are nearby their home. Once they have found some that are within driving range, they will select the one with the most affordable tuition. Even though location and cost are of importance, they are not the only qualifications that should be evaluated. Also important are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and additional qualifiers should contribute toward your final judgment when picking a plumbing training school. We will discuss that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Canton GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Canton GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Canton GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Canton GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Training Schools

When you have decided to earn a diploma, certificate or degree, you can start to refine your training options. Considering that there are so many plumbing trade and vocational schools in the Canton GA region, it's imperative to have a checklist of criteria that each school must meet. The first two that we discussed were location and the cost of tuition. And even though both qualifiers may be crucial when making your selection, there are additional factors that must be taken into account also. Below is a checklist of those added qualifications that you will need to analyze before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have received either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Make certain that the Canton GA program and school are accredited by a U.S. Department of Education approved accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive a quality education, it may assist in securing financial aid or student loans, which are often not available for non-accredited schools. Additionally, some states require that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Canton GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate may suggest that students were dissatisfied with the course and quit. It may also mean that the teachers were not qualified to instruct the students. It's also essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to help students obtain apprenticeships or employment in the Canton GA area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught together with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Check if the schools you are reviewing have working partnerships with local Canton GA plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Canton GA plumbing contractor if they can give you some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Canton GA home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between instructors and students. Speak with some of the students and get their opinions concerning class sizes and instruction. Last, talk with a few of the teachers and learn what their level of experience is in Canton GA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you are only able to attend classes at night or on weekends near Canton GA, confirm that the schools you are considering offer those choices. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Also, ask what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.

Learn More About Canton Plumber Trade Schools

Choose the Best Canton Plumber Training School

Choosing the ideal plumbing trade school will undoubtedly be the most important decision you will make to launch your new trade. As we have covered in this article, there are a number of things that you will need to examine and compare between the schools you are looking at. It's a necessity that any plumbing training that you are considering includes a good deal of hands-on training. Classes should be small in size and each student must have their personal equipment to train with. Classroom instruction needs to offer a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Courses differ in duration and the type of credential provided, so you will need to determine what length of program and degree or certificate will best satisfy your needs. Each program provides different options for certification as well. Perhaps the best means to research your short list of schools is to go to each campus and speak with the students and faculty. Take the time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the program you pick is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Canton GA.