How to Pick the Right Plumber Vocational School near Canton Georgia

The initial step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Canton GA. But with so many vocational schools to pick from, just how do you go about making sure that you enroll in the best one? Particularly because there are so many variables to evaluate. For instance, many prospective students will begin by looking for schools that are close to their home. After they have identified some that are within driving distance, they will select the one with the least expensive tuition. Even though cost and location are of importance, they are not the only things that must be considered. Also critical are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and other qualifiers should contribute toward your ultimate decision when selecting a plumbing trade school. We will discuss that checklist in more detail later in this article. But first, let's review a little bit about becoming a plumber and the instructional choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Canton GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Canton GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Canton GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Canton GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Training Schools

Now that you have decided to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Since there are numerous plumbing vocational and trade schools in the Canton GA area, it's important to have a checklist of qualifications that each program must satisfy. The initial two that we mentioned were location and tuition expense. And even though both qualifiers may be critical when making your selection, there are other variables that need to be taken into account also. Below is a checklist of those added qualifications that you will need to analyze before selecting a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have acquired either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Confirm that the Canton GA program is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a superior education, it can help in securing financial aid or student loans, which are often not available for non-accredited schools. Also, a number of states mandate that the plumbing training program be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Canton GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A lower completion rate could signify that students were disappointed with the program and dropped out. It may also indicate that the teachers were not competent to instruct the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist grads obtain apprenticeships or employment in the Canton GA area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Ask if the schools you are reviewing have working relationships with local Canton GA plumbers or plumbing professionals. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also furnishes job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. If not, ask a local Canton GA plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you are willing to relocate, the school must be within driving distance of your Canton GA home. Remember that if you decide to enroll in an out-of-state school, in addition to moving costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on some of the classes so that you can observe how large they are and experience the interaction between instructors and students. Speak to some of the students and get their comments relating to class sizes and instruction. Last, speak to a few of the instructors and find out what their level of experience is in Canton GA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are reviewing are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Canton GA, check that the programs you are comparing provide those options. If you can only attend part-time, make certain that the school you select offers part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, illness or family issues.

Find Out More About Canton Plumber Trade Schools

Pick the Right Canton Plumber Vocational School

Picking the best plumbing training program will undoubtedly be the most critical decision you will make to launch your new profession. As we have addressed in this article, there are several things that you will need to evaluate and compare between the training programs you are looking at. It's a necessity that any plumber tech school that you are considering includes a good deal of hands-on instruction. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom instruction should provide a real-world perspective, and the course of study should be up-to-date and conform with industry standards. Courses vary in length and the type of credential offered, so you will have to decide what length of program and degree or certificate will best serve your needs. Each program provides unique possibilities for certification as well. Perhaps The ideal way to research your final list of schools is to check out each campus and talk with the students and instructors. Invest some time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the program you pick is the ideal one for you. With the right training, effort and commitment, you can become a professional plumber in Canton GA.