How to Select the Best Plumbing Training Course near Columbus Georgia

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Columbus GA. But with numerous vocational schools to select from, just how do you tackle making certain that you enroll in the right one? Particularly since there are a number of factors to consider. For example, some students will commence by searching for schools that are nearby their home. When they have identified several that are within commuting range, they will select the one with the lowest tuition. Although cost and location are important, they are not the sole factors that should be examined. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and additional qualifiers should help mold your ultimate decision when picking a plumbing trade school. We will cover that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Columbus GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Columbus GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Columbus GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Columbus GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Vocational Schools

When you have made a decision to obtain a certificate, diploma or degree, you can start to narrow down your training options. Since there are so many plumbing vocational and trade schools in the Columbus GA region, it's important to have a checklist of criteria that each school must meet. The first 2 that we mentioned were location and tuition expense. And although both qualifiers may be crucial when making your decision, there are other variables that must be taken into account also. Following is a checklist of those additional qualifications that you will need to analyze before selecting a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have earned either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Make sure that the Columbus GA program is accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping ensure that you receive a quality education, it may help in acquiring financial assistance or student loans, which are in many cases not available for non-accredited schools. Also, many states mandate that the plumbing training program be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Columbus GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A lower completion rate might suggest that students were unhappy with the program and quit. It might also indicate that the teachers were not qualified to instruct the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to help grads obtain apprenticeships or employment in the Columbus GA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Check if the schools you are reviewing have working relationships with local Columbus GA plumbers or plumbing specialists. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Columbus GA plumbing contractor if they can give you some tips.

Where is the School Located?  Unless you are able to relocate, the school must be within driving distance of your Columbus GA residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized training as possible, which can be difficult in bigger classes. Ask if you can monitor a few of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Speak to a few of the students and get their feedback regarding class sizes and instruction. Finally, talk to a few of the instructors and learn what their level of experience is in Columbus GA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Columbus GA, verify that the programs you are comparing offer those choices. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Additionally, check out what the policy is to make-up classes should you miss any because of work, sickness or family issues.

Find Out More About Columbus Plumber Training Schools

Choose the Right Columbus Plumber Trade School

Choosing the right plumbing training program will undoubtedly be the most important decision you will make to start your new profession. As we have discussed in this article, there are a number of things that you will need to evaluate and compare between the schools you are considering. It's a necessity that any plumbing training program that you are considering includes a considerable amount of hands-on instruction. Classes should be small in size and each student must have their personal equipment to train with. Classroom teaching needs to offer a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Courses vary in duration and the kind of credential provided, so you will have to ascertain what length of program and certificate or degree will best satisfy your needs. Every training program offers unique possibilities for certification as well. Perhaps the best way to research your short list of schools is to check out each campus and speak with the teachers and students. Invest some time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the school you choose is the best one for you. With the proper training, hard work and dedication, you can become a professional plumber in Columbus GA.