How to Pick the Right Plumbing Course near Columbus Georgia

The first step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Columbus GA. But with so many technical schools to select from, just how do you tackle making certain that you enroll in the best one? Particularly since there are so many variables to evaluate. For example, some students will start by searching for schools that are nearby their home. When they have located a few that are within driving range, they will pick the one with the cheapest tuition. While cost and location are significant, they are not the only factors that must be considered. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and other qualifications should contribute toward your ultimate decision when selecting a plumber training school. We will discuss that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training choices that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Columbus GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Columbus GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Columbus GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Columbus GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Technical Schools

When you have made a decision to obtain a diploma, certificate or degree, you can start to refine your training options. Because there are numerous plumbing tech and trade schools in the Columbus GA area, it's imperative to have a checklist of criteria that each program must satisfy. The initial two that we discussed were location and the cost of tuition. And even though both qualifiers may be critical when making your selection, there are additional variables that must be taken into account also. Below is a checklist of those additional qualifications that you will need to assess before enrolling in a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Confirm that the Columbus GA school is accredited by a U.S. Department of Education acknowledged accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive an excellent education, it may help in obtaining financial aid or student loans, which are often not available for non-accredited schools. Additionally, a number of states require that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Columbus GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A lower completion rate may signify that students were disappointed with the program and quit. It might also suggest that the instructors were not qualified to train the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but also that it has the network of contacts to assist graduates secure apprenticeships or employment in the Columbus GA area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught in conjunction with an apprenticeship or an internship program. Those participating vocational and trade schools will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Ask if the schools you are comparing have working relationships with local Columbus GA plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by furnishing hands-on training, but it also furnishes job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be looking for. Otherwise, ask a local Columbus GA plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you are able to move, the school must be within commuting distance of your Columbus GA residence. Take note that if you decide to enroll in an out-of-state school, in addition to moving costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much personalized instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and witness first hand the interaction between students and instructors. Speak with a few of the students and get their opinions relating to class sizes and instruction. Finally, speak with a few of the teachers and find out what their level of experience is in Columbus GA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you are only able to go to classes at night or on weekends near Columbus GA, confirm that the schools you are considering offer those options. If you can only attend on a part-time basis, be sure that the school you select permits part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, sickness or family issues.

Learn More About Columbus Plumbing Vocational Schools

Pick the Best Columbus Plumbing Training School

Selecting the right plumbing training program will probably be the most critical decision you will make to start your new career. As we have addressed in this article, there are a number of factors that you will need to assess and compare among the schools you are reviewing. It's a must that any plumber training that you are assessing includes a good deal of hands-on training. Classes should be smaller in size and each student must have their personal equipment to train with. Classroom teaching needs to provide a real-world context, and the course of study should be up-to-date and conform with industry standards. Training programs vary in length and the type of credential offered, so you will have to decide what length of program and certificate or degree will best fulfill your needs. Each program offers different options for certification as well. Probably The ideal way to research your short list of schools is to visit each campus and speak with the students and instructors. Take the time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the training program you pick is the right one for you. With the right training, effort and dedication, you can become a professional plumber in Columbus GA.