How to Find the Right Plumber Trade School near Duluth Georgia

The first step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Duluth GA. But with numerous vocational schools to choose from, just how do you approach making sure that you enroll in the right one? Particularly because there are so many points to evaluate. For example, some prospective students will commence by searching for schools that are nearby their residence. After they have found a few that are within driving distance, they will select the one with the cheapest tuition. While location and cost are important, they are not the only things that need to be evaluated. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifications should influence your ultimate judgment when choosing a plumber training school. We will cover that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the educational choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Duluth GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Duluth GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Duluth GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Duluth GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Trade Schools

When you have decided to earn a diploma, certificate or degree, you can begin to narrow down your training options. Considering that there are so many plumbing tech and trade schools in the Duluth GA area, it's essential to have a checklist of qualifications that each program must satisfy. The first 2 that we discussed were location and the cost of tuition. And even though both qualifiers may be critical when making your selection, there are additional variables that must be taken into account as well. Following is a checklist of those additional qualifications that you will need to research before selecting a plumber tech school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have attained either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make sure that the Duluth GA school and program are accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive an excellent education, it may assist in acquiring financial assistance or student loans, which are often not available for non-accredited schools. Also, some states mandate that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Duluth GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate may indicate that students were unhappy with the course and quit. It might also suggest that the teachers were not qualified to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the field, but also that it has the network of contacts to help graduates secure apprenticeships or employment in the Duluth GA area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program within their network of plumbing businesses or labor unions. Check if the schools you are reviewing have working relationships with local Duluth GA plumbers or plumbing specialists. An apprenticeship not only offers a rewarding experience by providing hands-on training, but it also furnishes job opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Duluth GA plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you are willing to move, the school needs to be within commuting distance of your Duluth GA residence. Remember that if you decide to attend an out-of-state school, in addition to moving costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized training as possible, which can be difficult in larger classes. Ask if you can sit in on some of the classes so that you can see how large they are and witness first hand the interaction between instructors and students. Speak with some of the students and get their comments concerning class sizes and instruction. Last, speak to a few of the teachers and learn what their level of experience is in Duluth GA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you are only able to attend classes in the evening or on weekends near Duluth GA, verify that the programs you are comparing provide those choices. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, illness or family emergencies.

Get More Info About Duluth Plumbing Tech Schools

Pick the Right Duluth Plumbing Trade School

Choosing the ideal plumber trade school will undoubtedly be the most important decision you will make to begin your new trade. As we have addressed in this article, there are several factors that you will need to examine and compare between the training programs you are reviewing. It's a necessity that any plumber tech school that you are examining includes a considerable amount of hands-on instruction. Classes should be smaller in size and each student should have their personal equipment to train with. Classroom teaching needs to offer a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Courses differ in duration and the type of credential offered, so you will need to ascertain what length of program and degree or certificate will best fulfill your needs. Every program provides unique possibilities for certification as well. Probably the best means to research your short list of schools is to go to each campus and talk with the faculty and students. Invest some time to sit in on some classes. Tour the campus and facilities. Make sure that you are confident that the school you pick is the ideal one for you. With the right training, hard work and commitment, you can become a professional plumber in Duluth GA.