How to Enroll in the Right Plumbing School near Lagrange Georgia

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Lagrange GA. But with so many vocational schools to select from, just how do you go about making sure that you enroll in the right one? Especially since there are a number of variables to consider. For example, some potential students will commence by looking for schools that are nearby their home. After they have found a few that are within commuting range, they will pick the one with the most affordable tuition. Even though cost and location are significant, they are not the only qualifications that should be examined. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and additional qualifications should influence your ultimate decision when picking a plumber training school. We will address that checklist in greater detail later in this article. But first, let's talk a little bit about becoming a plumber and the instructional choices that are offered.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Lagrange GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Lagrange GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Lagrange GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Lagrange GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Once you have made a decision to earn a certificate, diploma or degree, you can begin to narrow down your school options. Considering that there are numerous plumbing tech and trade schools in the Lagrange GA area, it's important to have a checklist of qualifications that each school must meet. The first 2 that we mentioned were location and the cost of tuition. And although both qualifiers may be critical when making your determination, there are other factors that must be taken into account also. Following is a checklist of those added qualifications that you will need to research before selecting a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have received either a regional or a national accreditation. They can attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Confirm that the Lagrange GA school and program are accredited by a U.S. Department of Education recognized accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive an excellent education, it may help in obtaining financial aid or student loans, which are in many cases not available for non-accredited programs. Also, some states mandate that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Lagrange GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and complete the course. A low completion rate could suggest that students were unhappy with the program and dropped out. It might also mean that the instructors were not competent to instruct the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to help graduates secure apprenticeships or employment in the Lagrange GA area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Check if the schools you are reviewing have working relationships with local Lagrange GA plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local Lagrange GA plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you can move, the school must be within driving distance of your Lagrange GA residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between students and instructors. Speak to some of the students and get their feedback relating to class sizes and instruction. Finally, talk with a few of the instructors and find out what their level of experience is in Lagrange GA and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are assessing are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Lagrange GA, verify that the schools you are comparing offer those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Learn More About Lagrange Plumbing Tech Schools

Enroll in the Best Lagrange Plumber Training School

Choosing the best plumbing trade school will probably be the most important decision you will make to launch your new profession. As we have covered in this article, there are many things that you will need to assess and compare between the schools you are reviewing. It's a must that any plumbing tech school that you are considering includes a good deal of hands-on instruction. Classes should be smaller in size and each student should have their personal equipment to train with. Classroom teaching needs to offer a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs vary in duration and the kind of credential offered, so you will need to ascertain what length of program and credential will best fulfill your needs. Every training program provides unique possibilities for certification also. Perhaps the best means to research your short list of schools is to check out each campus and speak with the students and instructors. Invest some time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the program you select is the best one for you. With the right training, hard work and dedication, you can become a professional plumber in Lagrange GA.