How to Pick the Best Plumbing Training near Marietta Georgia

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Marietta GA. But with so many vocational schools to select from, just how do you go about making certain that you enroll in the best one? Particularly since there are so many points to examine. For example, some prospective students will start by searching for schools that are nearby their home. When they have identified several that are within driving range, they will decide on the one with the most affordable tuition. While location and cost are significant, they are not the only qualifications that need to be considered. Also critical are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and other qualifications should influence your ultimate judgment when choosing a plumber training school. We will address that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the instructional options that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Marietta GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Marietta GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Marietta GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Marietta GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Training Schools

When you have decided to earn a certificate, diploma or degree, you can begin to narrow down your school options. Since there are numerous plumbing vocational and trade schools in the Marietta GA region, it's essential to have a checklist of criteria that each program must satisfy. The first two that we mentioned were location and tuition expense. And even though both qualifiers may be critical when making your decision, there are additional factors that must be taken into account as well. Following is a checklist of those additional qualifications that you will need to analyze before selecting a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical programs have earned either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Make certain that the Marietta GA program and school are accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping ensure that you receive a quality education, it may help in securing financial assistance or student loans, which are often not available for non-accredited programs. Additionally, many states mandate that the plumbing training course be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Marietta GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A low completion rate might indicate that students were unhappy with the course and quit. It might also mean that the instructors were not qualified to train the students. It's similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to help grads secure apprenticeships or employment in the Marietta GA area.

Are Apprenticeship Programs Sponsored?  A large number of plumber trade programs are taught along with an internship or an apprenticeship program. Those participating vocational and trade programs will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Find out if the schools you are reviewing have working relationships with local Marietta GA plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also supplies job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local Marietta GA plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within driving distance of your Marietta GA residence. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much individualized instruction as possible, which can be challenging in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and witness first hand the interaction between students and instructors. Speak with a few of the students and get their comments regarding class sizes and instruction. Last, speak with some of the instructors and find out what their level of experience is in Marietta GA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near Marietta GA, check that the schools you are considering offer those options. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any due to work, illness or family responsibilities.

Learn More About Marietta Plumber Vocational Schools

Pick the Right Marietta Plumber Training School

Choosing the ideal plumbing trade school will undoubtedly be the most important decision you will make to start your new career. As we have discussed in this article, there are a number of factors that you will need to evaluate and compare between the training programs you are considering. It's a necessity that any plumber training that you are reviewing includes a lot of hands-on training. Classes should be small in size and each student must have their personal equipment to train with. Classroom instruction should provide a real-world frame of reference, and the training program should be current and conform with industry standards. Programs vary in length and the kind of credential provided, so you will have to determine what length of program and degree or certificate will best fulfill your needs. Every program offers different options for certification also. Probably the best means to research your final list of schools is to go to each campus and speak with the teachers and students. Take the time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you choose is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Marietta GA.