How to Enroll in the Right Plumber School near Milton Georgia

The initial step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near Milton GA. But with numerous vocational schools to select from, just how do you go about making sure that you enroll in the best one? Especially since there are a number of points to evaluate. For instance, many prospective students will start by searching for schools that are close to their residence. Once they have identified a few that are within driving range, they will select the one with the cheapest tuition. Even though cost and location are important, they are not the only factors that should be evaluated. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and other qualifiers should influence your final decision when selecting a plumbing trade school. We will discuss that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the educational choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Milton GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Milton GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Milton GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

There are several educational options available near Milton GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

Now that you have decided to obtain a diploma, certificate or degree, you can start to refine your training options. Because there are numerous plumbing tech and trade schools in the Milton GA region, it's essential to have a checklist of criteria that each program must satisfy. The first two that we mentioned were location and tuition expense. And while both qualifiers may be critical when making your selection, there are other variables that must be considered also. Following is a checklist of those additional qualifiers that you will need to research before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing technical programs have acquired either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for example electrical technology. Make certain that the Milton GA school is accredited by a U.S. Department of Education recognized accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive an excellent education, it may help in acquiring financial assistance or student loans, which are in many cases not available for non-accredited schools. Also, many states mandate that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Milton GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate might indicate that students were dissatisfied with the course and quit. It may also suggest that the instructors were not competent to instruct the students. It's similarly imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader list of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to assist graduates acquire apprenticeships or employment in the Milton GA area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Ask if the schools you are reviewing have referring partnerships with local Milton GA plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by supplying practical training, but it also furnishes job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using on the job. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be expecting. Otherwise, ask a local Milton GA plumbing company if they can provide some tips.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Milton GA home. Remember that if you decide to enroll in an out-of-state school, in addition to moving costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can monitor a few of the classes so that you can see how big they are and witness first hand the interaction between instructors and students. Talk to some of the students and get their feedback concerning class sizes and instruction. Finally, speak to a few of the instructors and learn what their level of experience is in Milton GA and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are assessing are flexible enough to fulfill your needs. If you can only go to classes in the evening or on weekends near Milton GA, confirm that the programs you are reviewing provide those choices. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Additionally, check out what the policy is to make-up classes should you miss any because of work, sickness or family responsibilities.

Get More Info About Milton Plumber Training Schools

Enroll in the Best Milton Plumber Vocational School

Picking the right plumber trade school will undoubtedly be the most critical decision you will make to begin your new profession. As we have discussed in this article, there are many things that you will need to assess and compare among the training programs you are considering. It's a necessity that any plumbing training that you are evaluating includes a considerable amount of hands-on training. Classes need to be smaller in size and each student should have their personal equipment to train with. Classroom education should provide a real-world context, and the course of study should be current and in-line with industry standards. Courses vary in length and the type of credential offered, so you will need to decide what length of program and credential will best satisfy your needs. Each program offers unique options for certification as well. Probably the best approach to research your final list of schools is to go to each campus and speak with the faculty and students. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the school you pick is the ideal one for you. With the proper training, effort and commitment, you can become a professional plumber in Milton GA.