How to Choose the Best Plumber Course near Sandy Springs Georgia

The initial step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Sandy Springs GA. But with so many vocational schools to pick from, just how do you go about making sure that you enroll in the ideal one? Particularly because there are so many factors to examine. For example, some prospective students will commence by looking for schools that are close to their home. When they have located a few that are within commuting range, they will choose the one with the most affordable tuition. Although location and cost are important, they are not the only things that need to be considered. Also critical are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and other qualifications should contribute toward your ultimate decision when picking a plumbing trade school. We will talk about that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the training choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Sandy Springs GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Sandy Springs GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Sandy Springs GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Sandy Springs GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Technical Schools

Once you have decided to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Considering that there are numerous plumbing trade and vocational schools in the Sandy Springs GA area, it's imperative to have a checklist of criteria that each program must satisfy. The first two that we discussed were location and the cost of tuition. And while both qualifiers may be crucial when making your determination, there are other variables that need to be taken into account as well. Following is a checklist of those added qualifiers that you will need to research before choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have acquired either a regional or a national accreditation. They can attain Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Confirm that the Sandy Springs GA program is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping make certain that you get a quality education, it can assist in securing financial aid or student loans, which are in many cases not available for non-accredited programs. Also, many states mandate that the plumbing training course be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Georgia Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Sandy Springs GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate may indicate that students were dissatisfied with the program and quit. It may also indicate that the instructors were not competent to train the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to assist grads acquire apprenticeships or employment in the Sandy Springs GA area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught together with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Check if the schools you are comparing have referring relationships with local Sandy Springs GA plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by furnishing hands-on training, but it also supplies employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. If not, ask a local Sandy Springs GA plumbing contracting company if they can give you some suggestions.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Sandy Springs GA home. Take note that if you decide to attend an out-of-state school, in addition to moving costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much personalized instruction as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can see how big they are and experience the interaction between teachers and students. Speak with some of the students and get their feedback regarding class sizes and instruction. Finally, talk to some of the instructors and find out what their level of experience is in Sandy Springs GA and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you are only able to go to classes at night or on weekends near Sandy Springs GA, check that the schools you are looking at offer those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.

Get More Info About Sandy Springs Plumbing Trade Schools

Choose the Best Sandy Springs Plumber Trade School

Picking the ideal plumber trade school will undoubtedly be the most critical decision you will make to launch your new profession. As we have addressed in this article, there are several factors that you will need to assess and compare among the schools you are looking at. It's a must that any plumber training program that you are considering includes a considerable amount of hands-on training. Classes need to be small in size and each student should have their personal equipment to train with. Classroom education should offer a real-world frame of reference, and the curriculum should be current and conform with industry standards. Courses differ in length and the kind of credential provided, so you will have to ascertain what length of program and degree or certificate will best serve your needs. Every program provides different options for certification as well. Probably the best means to research your short list of schools is to visit each campus and speak with the faculty and students. Take the time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the program you pick is the ideal one for you. With the proper training, hard work and commitment, you can become a professional plumber in Sandy Springs GA.