How to Enroll in the Right Plumbing Vocational School near Statesboro Georgia

The first step to becoming a plumbing tradesman or contractor is finding a plumbing trade school near Statesboro GA. But with so many technical schools to choose from, just how do you approach making sure that you enroll in the best one? Especially because there are so many variables to examine. For example, many potential students will begin by looking for schools that are nearby their residence. When they have located some that are within commuting range, they will choose the one with the lowest tuition. Even though cost and location are significant, they are not the only factors that should be examined. Also critical are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and additional qualifications should contribute toward your final judgment when selecting a plumber trade school. We will discuss that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Statesboro GA plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Statesboro GA plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Statesboro GA is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Statesboro GA to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Trade Schools

When you have decided to earn a certificate, diploma or degree, you can begin to focus your school options. Because there are numerous plumbing trade and vocational schools in the Statesboro GA area, it's imperative to have a checklist of qualifications that each school must meet. The first 2 that we talked about were location and tuition expense. And although both qualifiers may be important when making your decision, there are other factors that need to be considered also. Below is a checklist of those additional qualifications that you will need to assess prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational schools have earned either a regional or a national accreditation. They may attain Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Make sure that the Statesboro GA school is accredited by a U.S. Department of Education recognized accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping make certain that you obtain a superior education, it can assist in obtaining financial assistance or student loans, which are often unavailable for non-accredited programs. Also, many states mandate that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Georgia Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Statesboro GA schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate may suggest that students were dissatisfied with the program and dropped out. It might also signify that the instructors were not competent to train the students. It's similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but also that it has the network of contacts to help students secure apprenticeships or employment in the Statesboro GA area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Check if the schools you are comparing have referring partnerships with local Statesboro GA plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by supplying practical training, but it also furnishes employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. If not, ask a local Statesboro GA plumbing contractor if they can provide some suggestions.

Where is the School Located?  Unless you can move, the school must be within driving distance of your Statesboro GA home. Take note that if you decide to attend an out-of-state school, besides the added moving costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in bigger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Talk to some of the students and get their comments relating to class sizes and instruction. Finally, speak to some of the teachers and find out what their level of experience is in Statesboro GA and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you can only attend classes in the evening or on weekends near Statesboro GA, check that the schools you are looking at provide those choices. If you can only attend part-time, make sure that the school you select allows part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family issues.

Learn More About Statesboro Plumbing Trade Schools

Enroll in the Right Statesboro Plumber Training School

Picking the ideal plumbing training program will undoubtedly be the most important decision you will make to launch your new profession. As we have discussed in this article, there are many things that you will need to examine and compare between the schools you are reviewing. It's a necessity that any plumbing tech school that you are reviewing includes a lot of hands-on training. Classes need to be smaller in size and every student should have their personal equipment to train with. Classroom education needs to provide a real-world perspective, and the training program should be current and in-line with industry standards. Courses differ in duration and the type of credential provided, so you will need to ascertain what length of program and degree or certificate will best satisfy your needs. Each training program provides different options for certification as well. Perhaps the best way to research your short list of schools is to go to each campus and talk with the faculty and students. Take the time to attend some classes. Tour the campus and facilities. Make sure that you are confident that the training program you pick is the ideal one for you. With the right training, effort and dedication, you can become a professional plumber in Statesboro GA.