Home >> Idaho >> Coeur D Alene >> Becoming A Plumber


Request Free Info on Plumbing Training Schools Coeur D Alene ID 83814


How to Enroll in the Best Plumbing Training School near Coeur D Alene Idaho

Coeur D Alene Idaho plumber replacing kitchen sink faucetThe first step to learning to be a plumbing tradesman or contractor is finding a plumbing trade school near Coeur D Alene ID. But with so many vocational schools to pick from, just how do you go about making certain that you enroll in the ideal one? Especially since there are a number of points to consider. For instance, some students will commence by searching for schools that are nearby their residence. When they have found several that are within commuting distance, they will choose the one with the cheapest tuition. Although cost and location are of importance, they are not the sole qualifications that need to be considered. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and other qualifications should contribute toward your final judgment when picking a plumber training school. We will address that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the educational choices that are accessible.

Becoming a Plumber

Coeur D Alene Idaho plumbing contractor adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Coeur D Alene ID plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Coeur D Alene ID plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Coeur D Alene ID is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Coeur D Alene ID to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Vocational Schools

Coeur D Alene Idaho plumber replacing water heater

Once you have decided to earn a diploma, certificate or degree, you can begin to focus your training options. Since there are so many plumbing tech and trade schools in the Coeur D Alene ID area, it's imperative to have a checklist of criteria that each program must satisfy. The initial 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be critical when making your selection, there are other factors that must be taken into account as well. Following is a checklist of those additional qualifiers that you will need to analyze before selecting a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have received either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Verify that the Coeur D Alene ID program is accredited by a U.S. Department of Education acknowledged accrediting agency, for instance the Accreditation Board for Engineering and Technology. Along with helping guarantee that you obtain a superior education, it may assist in acquiring financial aid or student loans, which are often unavailable for non-accredited programs. Also, many states require that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Idaho Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Coeur D Alene ID schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate may indicate that students were dissatisfied with the course and dropped out. It could also indicate that the teachers were not qualified to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the trade, but also that it has the network of contacts to assist graduates secure apprenticeships or employment in the Coeur D Alene ID area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught in conjunction with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Ask if the schools you are considering have referring partnerships with local Coeur D Alene ID plumbers or plumbing professionals. An apprenticeship not only provides a valuable experience by supplying practical training, but it also supplies job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are state-of-the-art and what you will be working with in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. If not, ask a local Coeur D Alene ID plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to relocate, the school must be within driving distance of your Coeur D Alene ID home. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much personalized instruction as possible, which can be difficult in bigger classes. Ask if you can monitor a few of the classes so that you can see how large they are and witness first hand the interaction between instructors and students. Talk with a few of the students and get their feedback relating to class sizes and instruction. Finally, speak with some of the teachers and find out what their level of experience is in Coeur D Alene ID and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you are only able to attend classes in the evening or on weekends near Coeur D Alene ID, check that the schools you are reviewing provide those options. If you can only attend on a part-time basis, make certain that the school you select permits part-time enrollment. Also, ask what the policy is to make-up classes should you miss any due to work, sickness or family emergencies.

Find Out More About Coeur D Alene Plumber Trade Schools

Enroll in the Right Coeur D Alene Plumbing Training School

Picking the right plumber training program will undoubtedly be the most important decision you will make to launch your new profession. As we have discussed in this article, there are many factors that you will need to examine and compare between the schools you are reviewing. It's a prerequisite that any plumber tech school that you are considering includes a considerable amount of hands-on training. Classes need to be smaller in size and every student should have their own equipment to train with. Classroom education should provide a real-world perspective, and the training program should be up-to-date and conform with industry standards. Training programs differ in length and the kind of credential provided, so you will have to determine what length of program and credential will best serve your needs. Every training program provides unique possibilities for certification also. Perhaps The ideal way to research your final list of schools is to check out each campus and talk with the teachers and students. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make certain that you are confident that the school you pick is the ideal one for you. With the right training, hard work and dedication, you can become a professional plumber in Coeur D Alene ID.