How to Find the Right Plumbing Training near Lewiston Idaho

The first step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Lewiston ID. But with numerous technical schools to pick from, just how do you tackle making sure that you enroll in the right one? Especially because there are a number of factors to consider. For example, many potential students will commence by searching for schools that are close to their residence. Once they have identified some that are within driving distance, they will choose the one with the most affordable tuition. While location and cost are of importance, they are not the sole things that should be considered. Also important are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and additional qualifiers should influence your ultimate judgment when choosing a plumber trade school. We will discuss that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the instructional choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Lewiston ID plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Lewiston ID plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Lewiston ID is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Lewiston ID to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

Once you have decided to earn a diploma, certificate or degree, you can start to refine your training options. Because there are so many plumbing trade and vocational schools in the Lewiston ID region, it's important to have a checklist of qualifications that each program must meet. The first two that we talked about were location and tuition expense. And while both qualifiers may be critical when making your decision, there are other variables that must be taken into account also. Below is a checklist of those additional qualifications that you will need to analyze before enrolling in a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing technical schools have attained either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Confirm that the Lewiston ID program is accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. Along with helping ensure that you get a quality education, it can assist in obtaining financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Furthermore, some states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Idaho Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Lewiston ID schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A lower completion rate could suggest that students were dissatisfied with the course and dropped out. It might also indicate that the teachers were not competent to train the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which can mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to assist graduates acquire apprenticeships or jobs in the Lewiston ID area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught along with an internship or an apprenticeship program. Those participating technical and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Find out if the schools you are considering have working relationships with local Lewiston ID plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by furnishing practical training, but it also provides employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be instructed on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with concerning what you should be expecting. Otherwise, ask a local Lewiston ID plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Lewiston ID residence. Remember that if you decide to attend an out-of-state school, besides the added relocation costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized training as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Talk to a few of the students and get their opinions regarding class sizes and instruction. Finally, talk to a few of the teachers and find out what their level of experience is in Lewiston ID and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Lewiston ID, check that the programs you are reviewing provide those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Also, ask what the protocol is to make-up classes should you miss any due to work, sickness or family responsibilities.

Get More Info About Lewiston Plumber Vocational Schools

Choose the Best Lewiston Plumbing Training School

Selecting the right plumber training program will probably be the most important decision you will make to start your new career. As we have addressed in this article, there are many things that you will need to evaluate and compare between the schools you are considering. It's a prerequisite that any plumbing tech school that you are examining includes a lot of hands-on training. Classes should be small in size and every student must have their own equipment to train with. Classroom teaching should provide a real-world frame of reference, and the training program should be up-to-date and conform with industry standards. Training programs vary in length and the type of credential provided, so you will have to ascertain what length of program and degree or certificate will best serve your needs. Every training program offers unique options for certification as well. Perhaps The ideal approach to research your final list of schools is to go to each campus and talk with the teachers and students. Take the time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the program you select is the ideal one for you. With the proper training, hard work and dedication, you can become a professional plumber in Lewiston ID.