How to Enroll in the Right Plumbing Technical School near Aurora Illinois

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Aurora IL. But with numerous vocational schools to select from, just how do you undertake making certain that you enroll in the right one? Particularly because there are so many points to examine. For instance, some potential students will begin by searching for schools that are close to their residence. Once they have identified a few that are within driving distance, they will select the one with the lowest tuition. Even though location and cost are significant, they are not the only factors that need to be examined. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifiers should influence your ultimate decision when selecting a plumber trade school. We will cover that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the educational choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Aurora IL plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Aurora IL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Aurora IL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Aurora IL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Technical Schools

Now that you have made a decision to obtain a diploma, certificate or degree, you can start to narrow down your training options. Since there are so many plumbing tech and trade schools in the Aurora IL region, it's imperative to have a checklist of criteria that each program must meet. The first two that we discussed were location and the cost of tuition. And even though both qualifiers may be important when making your decision, there are additional variables that must be taken into account also. Following is a checklist of those added qualifications that you will need to assess prior to choosing a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have earned either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Make certain that the Aurora IL school is accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it can assist in acquiring financial assistance or student loans, which are often not available for non-accredited programs. Furthermore, a number of states mandate that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Illinois Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Aurora IL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A low completion rate could suggest that students were disappointed with the program and quit. It may also signify that the instructors were not qualified to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to help grads secure apprenticeships or employment in the Aurora IL area.

Are Apprenticeship Programs Sponsored?  Many plumber technical programs are taught along with an internship or an apprenticeship program. Those participating trade and technical schools will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Ask if the schools you are comparing have referring partnerships with local Aurora IL plumbers or plumbing professionals. An apprenticeship not only provides a rewarding experience by providing practical training, but it also supplies employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be expecting. If not, ask a local Aurora IL plumbing contracting company if they can provide some tips.

Where is the School Located?  Unless you are able to relocate, the school must be within commuting distance of your Aurora IL residence. Remember that if you decide to enroll in an out-of-state school, besides the added relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one instruction as possible, which can be difficult in larger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Speak with some of the students and get their opinions regarding class sizes and instruction. Last, talk to some of the teachers and learn what their level of experience is in Aurora IL and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the schools you are evaluating are flexible enough to meet your needs. If you can only go to classes in the evening or on weekends near Aurora IL, confirm that the programs you are reviewing offer those options. If you can only attend on a part-time basis, make certain that the school you select allows part-time enrollment. Also, check out what the policy is to make-up classes should you miss any because of work, illness or family issues.

Learn More About Aurora Plumbing Trade Schools

Pick the Right Aurora Plumbing Trade School

Picking the best plumbing training program will probably be the most important decision you will make to begin your new trade. As we have discussed in this article, there are many factors that you will need to assess and compare between the schools you are reviewing. It's a necessity that any plumbing training that you are considering includes a lot of hands-on instruction. Classes need to be small in size and each student must have their own equipment to train with. Classroom teaching should provide a real-world perspective, and the training program should be up-to-date and in-line with industry standards. Training programs vary in duration and the kind of credential offered, so you will have to decide what length of program and certificate or degree will best satisfy your needs. Every training program offers unique possibilities for certification also. Probably the best means to research your short list of schools is to go to each campus and talk with the faculty and students. Take the time to attend a few classes. Inspect the campus and facilities. Make sure that you are confident that the program you pick is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Aurora IL.