Home >> Illinois >> Geneva >> Plumber Trades Schools


Get Free Info on Plumber Training Courses Geneva IL 60119


How to Select the Best Plumbing Course near Geneva Illinois

Geneva Illinois plumbing contractor replacing kitchen faucetThe initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Geneva IL. But with numerous technical schools to select from, just how do you undertake making certain that you enroll in the right one? Especially since there are a number of points to examine. For example, many prospective students will begin by searching for schools that are nearby their residence. After they have identified some that are within driving distance, they will decide on the one with the cheapest tuition. While cost and location are important, they are not the sole things that need to be considered. Also important are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and other qualifications should influence your ultimate decision when picking a plumber training school. We will talk about that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the educational choices that are accessible.

What is a Plumber?

Geneva Illinois plumber repairing sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Geneva IL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Geneva IL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Geneva IL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Geneva IL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumbing Training Schools

Geneva Illinois plumber installing water heater

Now that you have made a decision to earn a diploma, certificate or degree, you can begin to refine your training options. Considering that there are numerous plumbing tech and trade schools in the Geneva IL region, it's important to have a checklist of criteria that each school must meet. The initial 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be critical when making your selection, there are additional factors that need to be taken into account also. Following is a checklist of those additional qualifications that you will need to research prior to selecting a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing technical programs have earned either a regional or a national accreditation. They may earn Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for instance electrical technology. Make sure that the Geneva IL school and program are accredited by a U.S. Department of Education approved accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping make certain that you receive an excellent education, it may assist in securing financial assistance or student loans, which are often not available for non-accredited schools. Also, many states require that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Illinois Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Geneva IL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A lower completion rate could suggest that students were unhappy with the program and dropped out. It could also suggest that the instructors were not qualified to instruct the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but also that it has the network of contacts to assist students acquire apprenticeships or jobs in the Geneva IL area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught in conjunction with an apprenticeship or an internship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Find out if the schools you are reviewing have working partnerships with local Geneva IL plumbers or plumbing specialists. An apprenticeship not only provides a valuable experience by supplying hands-on training, but it also provides employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be trained on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be looking for. Otherwise, ask a local Geneva IL plumbing company if they can give you some tips.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Geneva IL residence. Take note that if you decide to attend an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and experience the interaction between teachers and students. Talk to some of the students and get their opinions relating to class sizes and instruction. Finally, talk with a few of the instructors and find out what their level of experience is in Geneva IL and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are assessing are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Geneva IL, verify that the programs you are considering provide those choices. If you can only attend on a part-time basis, be sure that the school you select offers part-time enrollment. Also, ask what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Find Out More About Geneva Plumbing Trade Schools

Enroll in the Right Geneva Plumber Training School

Selecting the ideal plumbing training program will probably be the most important decision you will make to launch your new profession. As we have covered in this article, there are a number of factors that you will need to evaluate and compare among the training programs you are considering. It's a must that any plumber tech school that you are considering includes a good deal of hands-on instruction. Classes need to be small in size and each student must have their own equipment to train with. Classroom teaching needs to offer a real-world frame of reference, and the course of study should be up-to-date and conform with industry standards. Training programs vary in length and the kind of credential provided, so you will have to decide what length of program and degree or certificate will best satisfy your needs. Every training program provides different options for certification also. Perhaps The ideal way to research your short list of schools is to go to each campus and speak with the faculty and students. Invest some time to attend a few classes. Inspect the campus and facilities. Make certain that you are confident that the program you choose is the right one for you. With the right training, hard work and commitment, you can become a professional plumber in Geneva IL.