How to Select the Best Plumber School near Wilmette Illinois

The first step to learning to be a plumbing contractor or tradesman is locating a plumbing trade school near Wilmette IL. But with numerous technical schools to select from, just how do you tackle making sure that you enroll in the ideal one? Especially since there are so many factors to examine. For example, many prospective students will begin by searching for schools that are close to their residence. When they have identified a few that are within commuting range, they will select the one with the least expensive tuition. Even though cost and location are important, they are not the only factors that should be considered. Also critical are the reputations of the schools, their accreditation, as well as their job placement and graduation rates. These and additional qualifications should help mold your ultimate judgment when picking a plumbing training school. We will cover that checklist in greater detail later in this post. But first, let's talk a little bit about becoming a plumber and the training options that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Wilmette IL plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Wilmette IL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Wilmette IL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Wilmette IL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Training Schools

When you have made a decision to earn a diploma, certificate or degree, you can begin to refine your school options. Since there are numerous plumbing trade and vocational schools in the Wilmette IL region, it's imperative to have a checklist of qualifications that each program must meet. The initial 2 that we discussed were location and the cost of tuition. And although both qualifiers may be critical when making your decision, there are other variables that must be taken into account as well. Below is a checklist of those added qualifications that you will need to analyze before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing trade programs have received either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make certain that the Wilmette IL school is accredited by a U.S. Department of Education approved accrediting organization, which includes the Accreditation Board for Engineering and Technology. Along with helping make certain that you receive a superior education, it may assist in acquiring financial aid or student loans, which are in many cases not available for non-accredited schools. Additionally, many states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Illinois Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Wilmette IL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate could indicate that students were dissatisfied with the program and quit. It could also indicate that the instructors were not competent to instruct the students. It's also imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the field, but additionally that it has the network of contacts to help students secure apprenticeships or employment in the Wilmette IL area.

Are Apprenticeship Programs Sponsored?  A large number of plumber trade programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Ask if the schools you are comparing have referring relationships with local Wilmette IL plumbers or plumbing contractors. An apprenticeship not only offers a rewarding experience by providing practical training, but it also supplies employment opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the tools that you will be instructed on are state-of-the-art and what you will be working with on the job. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. If not, ask a local Wilmette IL plumbing company if they can give you some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within driving distance of your Wilmette IL residence. Take note that if you decide to enroll in an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Speak with several of the students and get their comments regarding class sizes and instruction. Last, speak with some of the instructors and find out what their level of experience is in Wilmette IL and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you are only able to attend classes in the evening or on weekends near Wilmette IL, verify that the schools you are considering offer those choices. If you can only attend part-time, make sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family emergencies.

Learn More About Wilmette Plumbing Training Schools

Pick the Right Wilmette Plumber Trade School

Choosing the best plumber training program will probably be the most critical decision you will make to begin your new career. As we have discussed in this article, there are a number of factors that you will need to examine and compare between the schools you are considering. It's a must that any plumber training that you are assessing includes a considerable amount of hands-on training. Classes should be smaller in size and each student must have their personal equipment to train with. Classroom education needs to provide a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Courses differ in duration and the kind of credential offered, so you will need to decide what length of program and degree or certificate will best satisfy your needs. Each program provides unique possibilities for certification as well. Perhaps the best way to research your short list of schools is to check out each campus and talk with the teachers and students. Take the time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the program you select is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Wilmette IL.