How to Pick the Best Plumber School near Dodge City Kansas

The initial step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Dodge City KS. But with so many vocational schools to choose from, just how do you approach making sure that you enroll in the right one? Particularly since there are so many points to examine. For example, some prospective students will commence by searching for schools that are nearby their residence. Once they have located some that are within commuting distance, they will select the one with the most affordable tuition. While cost and location are important, they are not the only qualifications that must be considered. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should influence your ultimate decision when choosing a plumbing trade school. We will address that checklist in greater detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Dodge City KS plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Dodge City KS plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Dodge City KS is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Dodge City KS to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

When you have decided to earn a diploma, certificate or degree, you can start to focus your training options. Since there are numerous plumbing tech and trade schools in the Dodge City KS region, it's imperative to have a checklist of qualifications that each school must meet. The initial two that we talked about were location and the cost of tuition. And although both qualifiers may be important when making your selection, there are other variables that must be taken into account also. Below is a checklist of those additional qualifications that you will need to research before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Numerous plumbing trade schools have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Make certain that the Dodge City KS program and school are accredited by a U.S. Department of Education acknowledged accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you receive an excellent education, it can help in securing financial assistance or student loans, which are in many cases unavailable for non-accredited programs. Furthermore, a number of states require that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Kansas Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Dodge City KS schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate may indicate that students were disappointed with the program and dropped out. It could also indicate that the instructors were not competent to instruct the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only affirm that the school has a good reputation within the industry, but also that it has the network of contacts to help grads obtain apprenticeships or jobs in the Dodge City KS area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating vocational and trade programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are comparing have working relationships with local Dodge City KS plumbers or plumbing contractors. An apprenticeship not only provides a rewarding experience by furnishing hands-on training, but it also furnishes employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be looking for. Otherwise, ask a local Dodge City KS plumbing company if they can provide some tips.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Dodge City KS home. Take note that if you decide to attend an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on some of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Talk to some of the students and get their comments relating to class sizes and instruction. Last, talk to some of the teachers and learn what their level of experience is in Dodge City KS and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you are only able to go to classes in the evening or on weekends near Dodge City KS, confirm that the programs you are reviewing offer those choices. If you can only attend part-time, make sure that the school you select offers part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, sickness or family issues.

Find Out More About Dodge City Plumbing Trade Schools

Pick the Right Dodge City Plumber Trade School

Picking the best plumbing trade school will undoubtedly be the most important decision you will make to start your new profession. As we have discussed in this article, there are a number of factors that you will need to assess and compare among the schools you are considering. It's a necessity that any plumbing training program that you are considering includes a lot of hands-on training. Classes need to be smaller in size and every student should have their personal equipment to train with. Classroom education should offer a real-world frame of reference, and the training program should be current and in-line with industry standards. Training programs vary in duration and the kind of credential provided, so you will need to decide what length of program and degree or certificate will best fulfill your needs. Each program offers unique options for certification as well. Perhaps the best means to research your final list of schools is to go to each campus and speak with the students and instructors. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you select is the right one for you. With the proper training, hard work and dedication, you can become a professional plumber in Dodge City KS.