How to Find the Best Plumber Trade School near Junction City Kansas

The first step to learning to be a plumbing contractor or tradesman is enrolling in a plumbing trade school near Junction City KS. But with so many vocational schools to choose from, just how do you undertake making sure that you enroll in the right one? Particularly since there are a number of factors to consider. For example, some prospective students will begin by looking for schools that are close to their home. When they have found a few that are within driving range, they will choose the one with the cheapest tuition. Even though cost and location are of importance, they are not the sole qualifications that should be considered. Also critical are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and additional qualifiers should contribute toward your final decision when selecting a plumber trade school. We will discuss that checklist in more detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the training choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Junction City KS plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Junction City KS plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Junction City KS is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Junction City KS to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumber Trade Schools

When you have decided to earn a diploma, certificate or degree, you can begin to refine your training options. Considering that there are so many plumbing trade and vocational schools in the Junction City KS area, it's important to have a checklist of criteria that each school must satisfy. The initial two that we mentioned were location and the cost of tuition. And although both qualifiers may be important when making your determination, there are additional factors that need to be considered as well. Below is a checklist of those added qualifiers that you will need to assess before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing technical schools have attained either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Verify that the Junction City KS program and school are accredited by a U.S. Department of Education approved accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping make certain that you receive a quality education, it can help in securing financial aid or student loans, which are often unavailable for non-accredited programs. Furthermore, many states mandate that the plumbing training program be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Kansas Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Junction City KS schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A low completion rate might indicate that students were disappointed with the course and quit. It may also mean that the teachers were not competent to instruct the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to help students obtain apprenticeships or jobs in the Junction City KS area.

Are Apprenticeship Programs Sponsored?  A large number of plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are reviewing have referring partnerships with local Junction City KS plumbers or plumbing professionals. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Junction City KS plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you are able to move, the school must be within commuting distance of your Junction City KS home. Remember that if you decide to attend an out-of-state school, in addition to relocation costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized instruction as possible, which can be difficult in bigger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and experience the interaction between students and instructors. Speak to some of the students and get their opinions regarding class sizes and instruction. Finally, speak to a few of the instructors and learn what their level of experience is in Junction City KS and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Junction City KS, check that the schools you are reviewing provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Learn More About Junction City Plumber Tech Schools

Enroll in the Right Junction City Plumber Trade School

Picking the right plumbing training program will probably be the most critical decision you will make to begin your new profession. As we have addressed in this article, there are several things that you will need to evaluate and compare among the training programs you are reviewing. It's a prerequisite that any plumbing training program that you are evaluating includes a lot of hands-on training. Classes need to be smaller in size and every student must have their own equipment to train with. Classroom education should offer a real-world frame of reference, and the curriculum should be current and in-line with industry standards. Training programs differ in duration and the kind of credential offered, so you will need to decide what length of program and credential will best satisfy your needs. Every program offers different options for certification as well. Perhaps the best means to research your short list of schools is to go to each campus and speak with the students and faculty. Take the time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the program you select is the best one for you. With the proper training, hard work and commitment, you can become a professional plumber in Junction City KS.