How to Pick the Best Plumber Tech School near Overland Park Kansas

The initial step to learning to be a plumbing tradesman or contractor is locating a plumbing trade school near Overland Park KS. But with so many technical schools to pick from, just how do you approach making certain that you enroll in the right one? Especially since there are so many variables to consider. For example, many potential students will start by searching for schools that are nearby their home. After they have located a few that are within commuting range, they will choose the one with the lowest tuition. Even though cost and location are of importance, they are not the sole things that need to be considered. Also critical are the reputations of the schools, their accreditation, along with their job placement and graduation rates. These and other qualifications should contribute toward your ultimate judgment when selecting a plumbing trade school. We will cover that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the training choices that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Overland Park KS plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Overland Park KS plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Overland Park KS is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Overland Park KS to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumber Training Schools

When you have decided to earn a diploma, certificate or degree, you can begin to refine your school options. Considering that there are numerous plumbing tech and trade schools in the Overland Park KS region, it's imperative to have a checklist of qualifications that each program must satisfy. The first 2 that we talked about were location and the cost of tuition. And while both qualifiers may be important when making your decision, there are additional factors that need to be considered as well. Following is a checklist of those additional qualifications that you will need to analyze prior to choosing a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Make sure that the Overland Park KS school is accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain a quality education, it can assist in securing financial assistance or student loans, which are in many cases unavailable for non-accredited programs. Additionally, a number of states require that the plumbing training course be accredited for it to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Kansas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Overland Park KS schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate might signify that students were unhappy with the course and dropped out. It might also indicate that the instructors were not qualified to train the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the trade, but additionally that it has the network of contacts to help grads obtain apprenticeships or employment in the Overland Park KS area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught together with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Check if the schools you are reviewing have working relationships with local Overland Park KS plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by providing practical training, but it also provides employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be instructed on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. Otherwise, ask a local Overland Park KS plumbing company if they can provide some suggestions.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your Overland Park KS residence. Remember that if you decide to enroll in an out-of-state school, in addition to moving costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much personalized training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and witness first hand the interaction between instructors and students. Speak to some of the students and get their feedback relating to class sizes and instruction. Finally, speak with some of the instructors and find out what their level of experience is in Overland Park KS and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Overland Park KS, check that the programs you are looking at offer those options. If you can only attend on a part-time basis, be sure that the school you select offers part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any because of work, illness or family responsibilities.

Get More Info About Overland Park Plumber Trade Schools

Enroll in the Best Overland Park Plumbing Training School

Choosing the best plumber training program will probably be the most critical decision you will make to start your new career. As we have covered in this article, there are a number of things that you will need to assess and compare between the training programs you are looking at. It's a prerequisite that any plumber training program that you are evaluating includes a lot of hands-on training. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Programs vary in duration and the type of credential provided, so you will need to decide what length of program and credential will best fulfill your needs. Each program provides unique options for certification also. Probably the best approach to research your short list of schools is to go to each campus and talk with the students and instructors. Take the time to monitor a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the ideal one for you. With the proper training, effort and commitment, you can become a professional plumber in Overland Park KS.