How to Choose the Right Plumber Training School near Meads Kentucky

The initial step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Meads KY. But with so many vocational schools to select from, just how do you approach making sure that you enroll in the ideal one? Especially because there are a number of variables to consider. For example, many prospective students will commence by looking for schools that are close to their home. When they have found a few that are within commuting distance, they will decide on the one with the lowest tuition. Even though location and cost are significant, they are not the sole factors that must be considered. Also critical are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and other qualifications should influence your ultimate decision when choosing a plumber training school. We will discuss that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the instructional choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Meads KY plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Meads KY plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Meads KY is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Meads KY to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

When you have made a decision to earn a certificate, diploma or degree, you can start to refine your training options. Since there are so many plumbing vocational and trade schools in the Meads KY region, it's essential to have a checklist of criteria that each school must satisfy. The initial two that we talked about were location and the cost of tuition. And while both qualifiers may be critical when making your determination, there are additional variables that need to be taken into account as well. Below is a checklist of those added qualifications that you will need to assess before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have received either a regional or a national accreditation. They can attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, such as electrical technology. Make certain that the Meads KY school and program are accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you acquire a quality education, it may assist in obtaining financial aid or student loans, which are frequently not available for non-accredited programs. Additionally, many states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Kentucky Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Meads KY schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and finish the course. A low completion rate may suggest that students were disappointed with the program and quit. It might also suggest that the instructors were not competent to train the students. It's also important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but also that it has the network of contacts to assist graduates obtain apprenticeships or employment in the Meads KY area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught in conjunction with an apprenticeship or an internship program. Those participating vocational and technical schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Find out if the schools you are comparing have working relationships with local Meads KY plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by supplying practical training, but it also provides job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using on the job. If you are already in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be looking for. If not, ask a local Meads KY plumbing company if they can provide some tips.

Where is the School Located?  Unless you can relocate, the school needs to be within driving distance of your Meads KY residence. Take note that if you decide to attend an out-of-state school, in addition to moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and witness first hand the interaction between teachers and students. Speak with some of the students and get their comments regarding class sizes and instruction. Finally, talk with a few of the teachers and find out what their level of experience is in Meads KY and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near Meads KY, confirm that the schools you are comparing offer those options. If you can only attend on a part-time basis, make sure that the school you select offers part-time enrollment. Additionally, find out what the policy is to make-up classes should you miss any due to work, illness or family responsibilities.

Find Out More About Meads Plumber Vocational Schools

Pick the Right Meads Plumbing Vocational School

Selecting the right plumbing trade school will probably be the most critical decision you will make to begin your new career. As we have covered in this article, there are many things that you will need to examine and compare between the schools you are looking at. It's a prerequisite that any plumbing training that you are reviewing includes a considerable amount of hands-on instruction. Classes should be small in size and every student must have their own equipment to train with. Classroom teaching should provide a real-world frame of reference, and the curriculum should be current and in-line with industry standards. Programs differ in duration and the kind of credential provided, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Every program offers unique possibilities for certification as well. Perhaps the best way to research your final list of schools is to visit each campus and speak with the students and instructors. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the school you select is the right one for you. With the right training, hard work and dedication, you can become a professional plumber in Meads KY.