How to Find the Right Plumber Training near Richmond Kentucky

The initial step to becoming a plumbing tradesman or contractor is finding a plumbing trade school near Richmond KY. But with numerous technical schools to pick from, just how do you go about making certain that you enroll in the ideal one? Especially because there are a number of points to consider. For example, some prospective students will start by searching for schools that are nearby their residence. When they have located several that are within commuting distance, they will decide on the one with the least expensive tuition. While cost and location are important, they are not the only factors that should be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifiers should contribute toward your ultimate judgment when picking a plumbing trade school. We will cover that checklist in more detail later in this post. But first, let's talk a little bit about becoming a plumber and the instructional choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Richmond KY plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Richmond KY plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Richmond KY is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near Richmond KY to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Trade Schools

Now that you have decided to obtain a diploma, certificate or degree, you can begin to focus your training options. Since there are so many plumbing vocational and trade schools in the Richmond KY area, it's imperative to have a checklist of qualifications that each school must meet. The initial two that we mentioned were location and the cost of tuition. And although both qualifiers may be important when making your decision, there are other variables that need to be considered also. Below is a checklist of those added qualifiers that you will need to assess before selecting a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing technical programs have earned either a regional or a national accreditation. They can receive Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Verify that the Richmond KY school is accredited by a U.S. Department of Education acknowledged accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping ensure that you acquire a quality education, it can assist in securing financial assistance or student loans, which are frequently not available for non-accredited programs. Additionally, many states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Kentucky Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Richmond KY schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A low completion rate might signify that students were dissatisfied with the program and dropped out. It may also mean that the teachers were not qualified to train the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has an excellent reputation within the trade, but also that it has the network of contacts to help students obtain apprenticeships or employment in the Richmond KY area.

Are Apprenticeship Programs Sponsored?  Numerous plumber technical programs are taught in conjunction with an apprenticeship or an internship program. Those participating trade and technical programs will help place you in an apprenticeship program within their network of plumbing companies or trade unions. Check if the schools you are reviewing have working partnerships with local Richmond KY plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by supplying hands-on training, but it also supplies employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the tools that you will be instructed on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be expecting. If not, ask a local Richmond KY plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school must be within driving distance of your Richmond KY residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can observe how large they are and experience the interaction between students and instructors. Speak with some of the students and get their comments regarding class sizes and instruction. Last, talk with some of the instructors and learn what their level of experience is in Richmond KY and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you can only go to classes at night or on weekends near Richmond KY, confirm that the programs you are reviewing offer those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, ask what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Find Out More About Richmond Plumbing Vocational Schools

Enroll in the Right Richmond Plumber Training School

Choosing the right plumbing training program will undoubtedly be the most critical decision you will make to start your new profession. As we have addressed in this article, there are a number of factors that you will need to examine and compare among the training programs you are looking at. It's a prerequisite that any plumbing training program that you are evaluating includes a lot of hands-on training. Classes should be small in size and every student must have their own equipment to train with. Classroom teaching should offer a real-world perspective, and the course of study should be up-to-date and conform with industry standards. Courses differ in length and the kind of credential offered, so you will have to decide what length of program and degree or certificate will best serve your needs. Every program offers unique possibilities for certification also. Probably The ideal way to research your final list of schools is to check out each campus and speak with the students and faculty. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you decide on is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Richmond KY.