How to Choose the Right Plumber Technical School near Washington Michigan

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Washington MI. But with so many technical schools to pick from, just how do you go about making sure that you enroll in the best one? Especially since there are so many factors to examine. For example, many potential students will start by looking for schools that are nearby their residence. Once they have located a few that are within driving distance, they will pick the one with the cheapest tuition. While location and cost are of importance, they are not the sole factors that need to be considered. Also important are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and other qualifications should help mold your final judgment when selecting a plumber trade school. We will discuss that checklist in more detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the educational options that are available.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Washington MI plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Washington MI plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Washington MI is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Washington MI to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Vocational Schools

Once you have decided to obtain a diploma, certificate or degree, you can begin to refine your school options. Because there are so many plumbing trade and vocational schools in the Washington MI area, it's essential to have a checklist of criteria that each school must satisfy. The first 2 that we discussed were location and tuition expense. And while both qualifiers may be important when making your selection, there are additional factors that must be taken into account as well. Below is a checklist of those added qualifications that you will need to analyze prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Confirm that the Washington MI school and program are accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a superior education, it may assist in securing financial aid or student loans, which are frequently unavailable for non-accredited schools. Also, many states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the Michigan Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Washington MI schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A low completion rate could signify that students were unhappy with the course and quit. It might also suggest that the instructors were not competent to train the students. It's also essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which may produce more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the field, but additionally that it has the network of contacts to assist students secure apprenticeships or employment in the Washington MI area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Check if the schools you are considering have working relationships with local Washington MI plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by supplying hands-on training, but it also supplies job opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be looking for. If not, ask a local Washington MI plumbing company if they can provide some pointers.

Where is the School Located?  Unless you are able to relocate, the school needs to be within commuting distance of your Washington MI residence. Take note that if you decide to attend an out-of-state school, besides the added moving costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much personalized training as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and witness first hand the interaction between students and teachers. Speak to some of the students and get their feedback relating to class sizes and instruction. Last, talk with some of the teachers and find out what their level of experience is in Washington MI and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Washington MI, verify that the programs you are looking at provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, check out what the protocol is to make-up classes should you miss any due to work, illness or family responsibilities.

Find Out More About Washington Plumbing Tech Schools

Choose the Best Washington Plumbing Vocational School

Picking the best plumber training program will undoubtedly be the most important decision you will make to begin your new career. As we have discussed in this article, there are many things that you will need to examine and compare between the training programs you are considering. It's a must that any plumber training program that you are examining includes a lot of hands-on training. Classes should be smaller in size and each student must have their own equipment to train with. Classroom teaching should offer a real-world perspective, and the course of study should be up-to-date and in-line with industry standards. Courses differ in length and the kind of credential offered, so you will need to determine what length of program and credential will best satisfy your needs. Each training program provides unique options for certification as well. Probably the best means to research your final list of schools is to go to each campus and speak with the students and instructors. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make certain that you are confident that the school you choose is the best one for you. With the right training, effort and commitment, you can become a professional plumber in Washington MI.