How to Select the Best Plumbing Technical School near Moorhead Minnesota

The first step to becoming a plumbing contractor or tradesman is enrolling in a plumbing trade school near Moorhead MN. But with numerous vocational schools to pick from, just how do you tackle making sure that you enroll in the ideal one? Particularly because there are so many factors to evaluate. For example, many potential students will commence by searching for schools that are close to their home. After they have identified some that are within commuting range, they will decide on the one with the most affordable tuition. While location and cost are of importance, they are not the only qualifications that need to be evaluated. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifications should contribute toward your final decision when choosing a plumber training school. We will address that checklist in greater detail later in this post. But to begin with, let's review a little bit about becoming a plumber and the educational choices that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Moorhead MN plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Moorhead MN plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Moorhead MN is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Moorhead MN to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Trade Schools

When you have made a decision to obtain a diploma, certificate or degree, you can begin to refine your school options. Considering that there are numerous plumbing trade and vocational schools in the Moorhead MN area, it's essential to have a checklist of qualifications that each school must satisfy. The first 2 that we talked about were location and the cost of tuition. And although both qualifiers may be crucial when making your determination, there are other factors that must be considered as well. Below is a checklist of those added qualifiers that you will need to research before selecting a plumber technical school.

Is the Plumbing School Accredited?  Numerous plumbing trade schools have received either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Confirm that the Moorhead MN program is accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you obtain a superior education, it can assist in securing financial aid or student loans, which are in many cases unavailable for non-accredited programs. Also, some states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Minnesota Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Moorhead MN schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A low completion rate might signify that students were unhappy with the course and dropped out. It could also suggest that the teachers were not qualified to instruct the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the trade, but additionally that it has the network of contacts to help students acquire apprenticeships or jobs in the Moorhead MN area.

Are Apprenticeship Programs Sponsored?  Numerous plumber trade programs are taught together with an apprenticeship or an internship program. Those participating vocational and trade schools will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Find out if the schools you are considering have referring relationships with local Moorhead MN plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by furnishing hands-on training, but it also furnishes job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, talk to the master plumber you are working with concerning what you should be looking for. Otherwise, ask a local Moorhead MN plumbing contractor if they can give you some suggestions.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Moorhead MN home. Take note that if you decide to attend an out-of-state school, besides the added relocation costs there may be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much personalized instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on a few of the classes so that you can observe how large they are and witness first hand the interaction between students and teachers. Talk with several of the students and get their comments concerning class sizes and instruction. Finally, talk to some of the teachers and learn what their level of experience is in Moorhead MN and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you can only attend classes at night or on weekends near Moorhead MN, confirm that the schools you are comparing provide those choices. If you can only attend part-time, make certain that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any due to work, sickness or family responsibilities.

Find Out More About Moorhead Plumber Vocational Schools

Choose the Best Moorhead Plumber Vocational School

Selecting the right plumbing training program will undoubtedly be the most critical decision you will make to launch your new profession. As we have covered in this article, there are a number of factors that you will need to evaluate and compare among the schools you are considering. It's a prerequisite that any plumbing training program that you are examining includes a good deal of hands-on training. Classes should be small in size and each student should have their own equipment to train with. Classroom instruction should provide a real-world context, and the course of study should be up-to-date and in-line with industry standards. Training programs vary in duration and the type of credential offered, so you will have to decide what length of program and certificate or degree will best fulfill your needs. Each training program offers unique possibilities for certification as well. Probably the best way to research your final list of schools is to visit each campus and talk with the faculty and students. Invest some time to sit in on some classes. Tour the campus and facilities. Make certain that you are confident that the training program you pick is the best one for you. With the right training, effort and dedication, you can become a professional plumber in Moorhead MN.