Home >> Minnesota >> Moorhead >> Plumbing Classes


Get Free Info on Plumber Training Schools Moorhead MN 56547


How to Enroll in the Right Plumber Vocational School near Moorhead Minnesota

Moorhead Minnesota plumber repairing kitchen faucetThe initial step to becoming a plumbing tradesman or contractor is enrolling in a plumbing trade school near Moorhead MN. But with numerous technical schools to select from, just how do you undertake making certain that you enroll in the best one? Especially because there are a number of points to evaluate. For example, some students will commence by looking for schools that are nearby their residence. When they have found some that are within commuting range, they will pick the one with the lowest tuition. While cost and location are of importance, they are not the sole things that should be examined. Also important are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and additional qualifications should contribute toward your final decision when picking a plumbing training school. We will address that checklist in more detail later in this post. But first, let's talk a little bit about becoming a plumber and the educational choices that are accessible.

What is a Plumber?

Moorhead Minnesota plumber adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Moorhead MN plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Moorhead MN plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Moorhead MN is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Programs

There are several educational options available near Moorhead MN to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Questions to Ask Plumbing Trade Schools

Moorhead Minnesota plumbing contractor repairing hot water heater

When you have made a decision to obtain a certificate, diploma or degree, you can start to focus your training options. Considering that there are so many plumbing trade and vocational schools in the Moorhead MN area, it's essential to have a checklist of qualifications that each school must meet. The first 2 that we talked about were location and the cost of tuition. And even though both qualifiers may be important when making your selection, there are other factors that must be taken into account as well. Below is a checklist of those added qualifications that you will need to analyze prior to selecting a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have received either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Confirm that the Moorhead MN school is accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire a superior education, it can assist in securing financial assistance or student loans, which are often not available for non-accredited programs. Furthermore, a number of states require that the plumbing training program be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Minnesota Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Moorhead MN schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate might signify that students were unhappy with the course and quit. It could also suggest that the teachers were not competent to instruct the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to help students secure apprenticeships or employment in the Moorhead MN area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught along with an internship or an apprenticeship program. Those participating vocational and technical programs will help place you in an apprenticeship program inside their network of plumbing contractors or labor unions. Ask if the schools you are considering have referring partnerships with local Moorhead MN plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by supplying hands-on training, but it also furnishes employment opportunities and helps to form relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are up-to-date and what you will be using on the job. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local Moorhead MN plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you are able to relocate, the school needs to be within driving distance of your Moorhead MN residence. Take note that if you decide to attend an out-of-state school, besides the added moving costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you get as much individualized training as possible, which can be difficult in bigger classes. Ask if you can sit in on a few of the classes so that you can observe how big they are and witness first hand the interaction between students and teachers. Speak with some of the students and get their feedback regarding class sizes and instruction. Finally, speak with some of the instructors and learn what their level of experience is in Moorhead MN and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Moorhead MN, check that the schools you are looking at offer those options. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Also, check out what the protocol is to make-up classes should you miss any because of work, sickness or family responsibilities.

Learn More About Moorhead Plumber Tech Schools

Choose the Right Moorhead Plumber Trade School

Picking the best plumber trade school will probably be the most critical decision you will make to start your new profession. As we have discussed in this article, there are many factors that you will need to assess and compare between the training programs you are looking at. It's a must that any plumbing training program that you are evaluating includes a lot of hands-on training. Classes need to be smaller in size and each student should have their personal equipment to train with. Classroom instruction should provide a real-world perspective, and the training program should be current and in-line with industry standards. Training programs differ in duration and the kind of credential provided, so you will have to ascertain what length of program and credential will best serve your needs. Every training program offers different options for certification also. Perhaps The ideal means to research your short list of schools is to check out each campus and speak with the students and instructors. Invest some time to attend some classes. Tour the campus and facilities. Make sure that you are confident that the training program you select is the ideal one for you. With the right training, effort and dedication, you can become a professional plumber in Moorhead MN.