How to Find the Best Plumbing Training School near Ballwin Missouri

The initial step to becoming a plumbing contractor or tradesman is enrolling in a plumbing trade school near Ballwin MO. But with so many technical schools to choose from, just how do you go about making sure that you enroll in the right one? Particularly because there are a number of factors to examine. For instance, some potential students will begin by looking for schools that are close to their residence. When they have found some that are within commuting range, they will select the one with the least expensive tuition. Although cost and location are important, they are not the sole factors that should be considered. Also critical are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifications should influence your final judgment when choosing a plumbing training school. We will discuss that checklist in more detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the training options that are accessible.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Ballwin MO plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Ballwin MO plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Ballwin MO is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Ballwin MO to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Training Schools

Now that you have made a decision to earn a diploma, certificate or degree, you can begin to narrow down your training options. Considering that there are so many plumbing vocational and trade schools in the Ballwin MO area, it's essential to have a checklist of criteria that each program must meet. The initial 2 that we mentioned were location and the cost of tuition. And while both qualifiers may be critical when making your selection, there are other factors that must be considered as well. Following is a checklist of those added qualifications that you will need to assess before choosing a plumber technical school.

Is the Plumbing School Accredited?  Numerous plumbing vocational schools have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make certain that the Ballwin MO program and school are accredited by a U.S. Department of Education approved accrediting organization, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you get a quality education, it may assist in securing financial assistance or student loans, which are often not available for non-accredited schools. Furthermore, a number of states require that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Missouri Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Ballwin MO schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A low completion rate could indicate that students were unhappy with the program and quit. It may also mean that the teachers were not qualified to train the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the trade, but also that it has the network of contacts to help grads secure apprenticeships or employment in the Ballwin MO area.

Are Apprenticeship Programs Sponsored?  Many plumber trade programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Ask if the schools you are comparing have working partnerships with local Ballwin MO plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also supplies employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the tools that you will be trained on are state-of-the-art and what you will be using in the field. If you are already in an internship or an apprenticeship, consult with the master plumber you are working under concerning what you should be expecting. If not, ask a local Ballwin MO plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Ballwin MO home. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one instruction as possible, which can be challenging in bigger classes. Ask if you can sit in on a couple of the classes so that you can see how large they are and witness first hand the interaction between students and teachers. Speak with a few of the students and get their feedback concerning class sizes and instruction. Last, speak to a few of the teachers and learn what their level of experience is in Ballwin MO and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are reviewing are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near Ballwin MO, check that the schools you are looking at offer those choices. If you can only attend on a part-time basis, be sure that the school you select permits part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Find Out More About Ballwin Plumbing Trade Schools

Choose the Right Ballwin Plumbing Vocational School

Selecting the ideal plumber trade school will undoubtedly be the most important decision you will make to start your new trade. As we have addressed in this article, there are many factors that you will need to assess and compare among the training programs you are reviewing. It's a prerequisite that any plumbing training program that you are considering includes a considerable amount of hands-on instruction. Classes need to be smaller in size and every student must have their personal equipment to train with. Classroom teaching should provide a real-world context, and the course of study should be current and conform with industry standards. Courses differ in length and the type of credential offered, so you will need to ascertain what length of program and credential will best fulfill your needs. Each program provides unique possibilities for certification also. Probably the best way to research your final list of schools is to check out each campus and talk with the students and faculty. Take the time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Ballwin MO.