How to Enroll in the Right Plumbing Technical School near Hillside New Jersey

The first step to learning to be a plumbing contractor or tradesman is finding a plumbing trade school near Hillside NJ. But with numerous vocational schools to choose from, just how do you approach making sure that you enroll in the right one? Especially because there are a number of factors to examine. For example, some prospective students will commence by looking for schools that are nearby their residence. After they have found a few that are within commuting range, they will pick the one with the most affordable tuition. Although cost and location are of importance, they are not the only things that must be evaluated. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and additional qualifiers should influence your ultimate decision when selecting a plumbing trade school. We will discuss that checklist in greater detail later in this article. But first, let's review a little bit about becoming a plumber and the educational options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Hillside NJ plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Hillside NJ plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Hillside NJ is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Options

There are several educational options available near Hillside NJ to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Trade Schools

Once you have decided to obtain a diploma, certificate or degree, you can begin to refine your school options. Because there are so many plumbing vocational and trade schools in the Hillside NJ area, it's imperative to have a checklist of qualifications that each program must satisfy. The initial 2 that we discussed were location and tuition expense. And although both qualifiers may be important when making your selection, there are other factors that need to be considered also. Below is a checklist of those additional qualifications that you will need to research prior to selecting a plumber trade school.

Is the Plumbing School Accredited?  Numerous plumbing trade programs have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Make certain that the Hillside NJ program and school are accredited by a U.S. Department of Education recognized accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping ensure that you acquire an excellent education, it may assist in acquiring financial assistance or student loans, which are in many cases not available for non-accredited programs. Furthermore, many states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the New Jersey Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Hillside NJ schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate might indicate that students were dissatisfied with the course and dropped out. It might also suggest that the teachers were not qualified to train the students. It's similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the trade, but also that it has the network of contacts to assist graduates obtain apprenticeships or jobs in the Hillside NJ area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught along with an apprenticeship or an internship program. Those participating vocational and trade programs will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Find out if the schools you are comparing have referring partnerships with local Hillside NJ plumbers or plumbing professionals. An apprenticeship not only offers a valuable experience by providing practical training, but it also provides job opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are already in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Hillside NJ plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you are willing to relocate, the school needs to be within commuting distance of your Hillside NJ residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there might be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much individualized instruction as possible, which can be difficult in larger classes. Ask if you can monitor a few of the classes so that you can see how large they are and witness first hand the interaction between teachers and students. Talk to some of the students and get their opinions relating to class sizes and instruction. Finally, talk to some of the instructors and find out what their level of experience is in Hillside NJ and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are reviewing are flexible enough to fulfill your needs. If you are only able to attend classes in the evening or on weekends near Hillside NJ, confirm that the schools you are considering provide those choices. If you can only attend part-time, make certain that the school you select permits part-time enrollment. Also, check out what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Learn More About Hillside Plumbing Tech Schools

Enroll in the Right Hillside Plumber Vocational School

Choosing the ideal plumbing trade school will undoubtedly be the most important decision you will make to begin your new trade. As we have addressed in this article, there are many things that you will need to examine and compare between the schools you are reviewing. It's a prerequisite that any plumber tech school that you are assessing includes a good deal of hands-on instruction. Classes should be smaller in size and each student should have their own equipment to train with. Classroom education needs to provide a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Courses differ in duration and the type of credential offered, so you will have to decide what length of program and credential will best satisfy your needs. Each program offers different possibilities for certification also. Probably the best way to research your short list of schools is to go to each campus and speak with the students and instructors. Take the time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the school you select is the right one for you. With the right training, effort and commitment, you can become a professional plumber in Hillside NJ.