How to Find the Best Plumbing Technical School near Stafford New Jersey

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Stafford NJ. But with so many technical schools to choose from, just how do you go about making certain that you enroll in the ideal one? Particularly since there are so many points to consider. For example, some students will commence by searching for schools that are close to their residence. When they have located several that are within commuting distance, they will pick the one with the most affordable tuition. Even though cost and location are of importance, they are not the only factors that should be considered. Also important are the accreditation and reputations of the schools, along with their job placement and graduation rates. These and other qualifiers should influence your ultimate judgment when choosing a plumbing training school. We will discuss that checklist in greater detail later in this article. But to begin with, let's review a little bit about becoming a plumber and the instructional options that are accessible.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Stafford NJ plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Stafford NJ plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Stafford NJ is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Certificate and Degree Programs

There are several educational options available near Stafford NJ to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Tech Schools

Now that you have decided to earn a certificate, diploma or degree, you can start to focus your school options. Considering that there are numerous plumbing vocational and trade schools in the Stafford NJ region, it's imperative to have a checklist of qualifications that each program must satisfy. The first 2 that we discussed were location and tuition expense. And although both qualifiers may be crucial when making your determination, there are other variables that must be considered as well. Below is a checklist of those additional qualifications that you will need to analyze prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing trade schools have attained either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for example electrical technology. Verify that the Stafford NJ program is accredited by a U.S. Department of Education approved accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping ensure that you get a superior education, it may assist in obtaining financial assistance or student loans, which are in many cases not available for non-accredited programs. Also, some states mandate that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the New Jersey Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Stafford NJ schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A low completion rate may indicate that students were disappointed with the course and quit. It may also suggest that the instructors were not competent to instruct the students. It's similarly important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader directory of graduates, which can result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has an excellent reputation within the field, but also that it has the network of contacts to help graduates obtain apprenticeships or jobs in the Stafford NJ area.

Are Apprenticeship Programs Sponsored?  Numerous plumber trade programs are taught together with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program inside their network of plumbing businesses or labor unions. Ask if the schools you are considering have referring partnerships with local Stafford NJ plumbers or plumbing companies. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be instructed on are up-to-date and what you will be working with on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under concerning what you should be expecting. Otherwise, ask a local Stafford NJ plumbing contracting company if they can give you some pointers.

Where is the School Located?  Unless you are able to move, the school needs to be within driving distance of your Stafford NJ residence. Remember that if you decide to attend an out-of-state school, besides the added moving costs there may be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much individualized training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and witness first hand the interaction between students and teachers. Speak to some of the students and get their opinions regarding class sizes and instruction. Finally, talk with some of the instructors and learn what their level of experience is in Stafford NJ and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Stafford NJ, verify that the schools you are comparing provide those choices. If you can only attend on a part-time basis, be sure that the school you select offers part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, sickness or family emergencies.

Get More Info About Stafford Plumbing Tech Schools

Pick the Right Stafford Plumbing Trade School

Choosing the ideal plumber training program will probably be the most important decision you will make to start your new trade. As we have addressed in this article, there are several things that you will need to assess and compare between the schools you are considering. It's a prerequisite that any plumbing tech school that you are evaluating includes a considerable amount of hands-on training. Classes need to be small in size and each student should have their own equipment to train with. Classroom teaching should offer a real-world context, and the training program should be current and in-line with industry standards. Courses differ in length and the kind of credential provided, so you will have to decide what length of program and degree or certificate will best satisfy your needs. Every training program provides unique possibilities for certification also. Probably the best way to research your short list of schools is to go to each campus and talk with the teachers and students. Take the time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the school you choose is the best one for you. With the proper training, effort and dedication, you can become a professional plumber in Stafford NJ.