How to Choose the Best Plumbing Tech School near Santa Fe New Mexico

The initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing trade school near Santa Fe NM. But with numerous technical schools to pick from, just how do you go about making sure that you enroll in the ideal one? Especially since there are so many points to evaluate. For instance, many potential students will begin by looking for schools that are close to their home. When they have found a few that are within driving range, they will pick the one with the most affordable tuition. Even though location and cost are important, they are not the only things that need to be considered. Also critical are the accreditation and reputations of the schools, in addition to their job placement and graduation rates. These and additional qualifications should influence your final judgment when selecting a plumbing training school. We will address that checklist in greater detail later in this post. But to begin with, let's talk a little bit about becoming a plumber and the educational choices that are offered.

Becoming a Plumber

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Santa Fe NM plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Santa Fe NM plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Santa Fe NM is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumber Degree and Certificate Options

There are several educational options available near Santa Fe NM to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Points to Ask Plumber Technical Schools

Once you have made a decision to earn a certificate, diploma or degree, you can begin to focus your training options. Because there are numerous plumbing vocational and trade schools in the Santa Fe NM region, it's important to have a checklist of criteria that each school must meet. The first 2 that we mentioned were location and the cost of tuition. And even though both qualifiers may be critical when making your selection, there are other factors that must be considered also. Following is a checklist of those added qualifiers that you will need to assess before choosing a plumber vocational school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have acquired either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which pertains to an individual program, for instance electrical technology. Confirm that the Santa Fe NM program and school are accredited by a U.S. Department of Education acknowledged accrediting agency, such as the Accreditation Board for Engineering and Technology. In addition to helping ensure that you receive a quality education, it may assist in securing financial assistance or student loans, which are in many cases unavailable for non-accredited programs. Additionally, many states require that the plumbing training course be accredited in order to qualify for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the New Mexico Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Santa Fe NM schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the course. A lower completion rate may suggest that students were unhappy with the program and quit. It could also suggest that the teachers were not competent to train the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which can mean more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only confirm that the school has a good reputation within the industry, but also that it has the network of contacts to help graduates acquire apprenticeships or jobs in the Santa Fe NM area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught together with an internship or an apprenticeship program. Those participating trade and technical schools will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Check if the schools you are considering have working relationships with local Santa Fe NM plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by providing practical training, but it also furnishes employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be using in the field. If you are currently in an internship or an apprenticeship, check with the master plumber you are working with concerning what you should be expecting. If not, ask a local Santa Fe NM plumbing contracting company if they can give you some tips.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Santa Fe NM home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you get as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can see how large they are and witness first hand the interaction between instructors and students. Talk to some of the students and get their comments regarding class sizes and instruction. Finally, speak with a few of the instructors and find out what their level of experience is in Santa Fe NM and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are evaluating are flexible enough to fulfill your needs. If you are only able to go to classes at night or on weekends near Santa Fe NM, verify that the schools you are looking at offer those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, find out what the policy is to make-up classes should you miss any because of work, illness or family issues.

Find Out More About Santa Fe Plumbing Trade Schools

Choose the Right Santa Fe Plumber Trade School

Selecting the ideal plumbing trade school will probably be the most important decision you will make to launch your new profession. As we have discussed in this article, there are a number of things that you will need to evaluate and compare among the schools you are looking at. It's a prerequisite that any plumbing tech school that you are considering includes a considerable amount of hands-on instruction. Classes need to be smaller in size and every student should have their own equipment to train with. Classroom instruction needs to offer a real-world frame of reference, and the training program should be up-to-date and in-line with industry standards. Programs vary in duration and the kind of credential offered, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Each training program provides different options for certification also. Perhaps the best approach to research your short list of schools is to check out each campus and talk with the students and instructors. Invest some time to attend some classes. Tour the campus and facilities. Make certain that you are confident that the school you decide on is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Santa Fe NM.