Home >> New Mexico >> South Valley >> Becoming A Plumber


Request Free Info on Plumber Training Classes South Valley NM 87102


How to Find the Right Plumbing Training near South Valley New Mexico

South Valley New Mexico plumbing contractor repairing kitchen faucetThe initial step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near South Valley NM. But with numerous vocational schools to select from, just how do you tackle making sure that you enroll in the right one? Especially because there are so many points to consider. For instance, some potential students will commence by looking for schools that are nearby their residence. After they have found a few that are within driving distance, they will select the one with the least expensive tuition. Even though location and cost are of importance, they are not the only things that need to be examined. Also important are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and other qualifications should contribute toward your final decision when picking a plumbing trade school. We will cover that checklist in more detail later in this post. But first, let's review a little bit about becoming a plumber and the training options that are available.

Becoming a Plumber

South Valley New Mexico plumber adjusting sink pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local South Valley NM plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of South Valley NM plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in South Valley NM is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Options

There are several educational options available near South Valley NM to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Tech Schools

South Valley New Mexico plumbing contractor repairing hot water heater

When you have decided to earn a diploma, certificate or degree, you can begin to refine your school options. Since there are numerous plumbing trade and vocational schools in the South Valley NM area, it's imperative to have a checklist of qualifications that each school must meet. The first two that we discussed were location and tuition expense. And while both qualifiers may be crucial when making your determination, there are other variables that must be considered as well. Following is a checklist of those added qualifications that you will need to analyze before enrolling in a plumber trade school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have acquired either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Confirm that the South Valley NM program is accredited by a U.S. Department of Education acknowledged accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you get a quality education, it can help in acquiring financial aid or student loans, which are frequently unavailable for non-accredited schools. Furthermore, many states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the New Mexico Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of South Valley NM schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A low completion rate may indicate that students were dissatisfied with the course and quit. It may also mean that the teachers were not qualified to instruct the students. It's also important that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has a good reputation within the field, but also that it has the network of contacts to assist grads obtain apprenticeships or employment in the South Valley NM area.

Are Apprenticeship Programs Sponsored?  Numerous plumber training programs are taught together with an apprenticeship or an internship program. Those participating trade and technical schools will help place you in an apprenticeship program inside their network of plumbing companies or labor unions. Check if the schools you are considering have referring relationships with local South Valley NM plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by providing practical training, but it also supplies employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Make certain that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be using on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working under regarding what you should be expecting. Otherwise, ask a local South Valley NM plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your South Valley NM home. Remember that if you decide to enroll in an out-of-state school, besides the added relocation costs there might be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can see how big they are and experience the interaction between teachers and students. Talk to several of the students and get their feedback regarding class sizes and instruction. Finally, talk with a few of the teachers and find out what their level of experience is in South Valley NM and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to meet your needs. If you are only able to go to classes in the evening or on weekends near South Valley NM, confirm that the programs you are looking at offer those choices. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any because of work, sickness or family issues.

Find Out More About South Valley Plumbing Vocational Schools

Enroll in the Right South Valley Plumbing Vocational School

Selecting the right plumbing trade school will undoubtedly be the most important decision you will make to start your new trade. As we have discussed in this article, there are a number of factors that you will need to evaluate and compare among the training programs you are looking at. It's a prerequisite that any plumber tech school that you are assessing includes a considerable amount of hands-on instruction. Classes need to be smaller in size and every student must have their own equipment to train with. Classroom teaching should offer a real-world perspective, and the curriculum should be up-to-date and conform with industry standards. Training programs differ in length and the type of credential offered, so you will have to determine what length of program and degree or certificate will best serve your needs. Each program provides unique options for certification as well. Perhaps the best approach to research your short list of schools is to check out each campus and speak with the students and instructors. Invest some time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the training program you select is the best one for you. With the right training, effort and dedication, you can become a professional plumber in South Valley NM.