How to Find the Best Plumber Trade School near Shirley New York

The first step to becoming a plumbing contractor or tradesman is locating a plumbing trade school near Shirley NY. But with so many vocational schools to select from, just how do you undertake making sure that you enroll in the best one? Particularly because there are a number of points to examine. For example, many potential students will start by searching for schools that are close to their residence. After they have located some that are within commuting distance, they will select the one with the least expensive tuition. Even though location and cost are significant, they are not the only qualifications that must be considered. Also important are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and additional qualifications should influence your ultimate decision when selecting a plumber trade school. We will cover that checklist in more detail later in this article. But first, let's review a little bit about becoming a plumber and the instructional options that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Shirley NY plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of Shirley NY plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Shirley NY is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near Shirley NY to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumber Vocational Schools

Once you have decided to earn a diploma, certificate or degree, you can start to focus your training options. Because there are numerous plumbing tech and trade schools in the Shirley NY region, it's essential to have a checklist of criteria that each program must satisfy. The initial two that we mentioned were location and the cost of tuition. And even though both qualifiers may be critical when making your determination, there are other factors that must be considered also. Below is a checklist of those additional qualifications that you will need to analyze prior to choosing a plumber trade school.

Is the Plumbing School Accredited?  Many plumbing trade programs have received either a regional or a national accreditation. They may receive Institutional Accreditation, which focuses on the school's programs overall, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Verify that the Shirley NY program is accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you acquire an excellent education, it may assist in obtaining financial assistance or student loans, which are often unavailable for non-accredited schools. Also, some states require that the plumbing training course be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the New York Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Shirley NY schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A lower completion rate might indicate that students were unhappy with the program and quit. It might also indicate that the instructors were not competent to instruct the students. It's also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has an excellent reputation within the industry, but additionally that it has the network of contacts to help students obtain apprenticeships or employment in the Shirley NY area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught together with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing contractors or trade unions. Ask if the schools you are comparing have working partnerships with local Shirley NY plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also furnishes employment opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be working with on the job. If you are currently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. If not, ask a local Shirley NY plumbing contracting company if they can provide some pointers.

Where is the School Located?  Unless you can relocate, the school needs to be within commuting distance of your Shirley NY residence. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's desirable that you receive as much one-on-one training as possible, which can be difficult in larger classes. Ask if you can monitor a couple of the classes so that you can see how large they are and witness first hand the interaction between students and teachers. Talk with a few of the students and get their comments concerning class sizes and instruction. Finally, speak to a few of the instructors and find out what their level of experience is in Shirley NY and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to fulfill your needs. If you can only attend classes in the evening or on weekends near Shirley NY, confirm that the programs you are looking at provide those choices. If you can only attend on a part-time basis, be sure that the school you select allows part-time enrollment. Additionally, find out what the protocol is to make-up classes should you miss any due to work, sickness or family responsibilities.

Find Out More About Shirley Plumber Trade Schools

Pick the Best Shirley Plumbing Trade School

Selecting the ideal plumber trade school will undoubtedly be the most critical decision you will make to begin your new trade. As we have covered in this article, there are many factors that you will need to evaluate and compare between the schools you are reviewing. It's a necessity that any plumber tech school that you are evaluating includes a lot of hands-on training. Classes should be smaller in size and every student must have their personal equipment to train with. Classroom teaching needs to offer a real-world frame of reference, and the course of study should be up-to-date and in-line with industry standards. Courses vary in length and the kind of credential offered, so you will need to decide what length of program and certificate or degree will best serve your needs. Each program offers different options for certification also. Probably The ideal approach to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the program you choose is the best one for you. With the right training, hard work and dedication, you can become a professional plumber in Shirley NY.