Home >> North Carolina >> Greensboro >> Courses For Plumbers


Get Free Info on Plumber Training Classes Greensboro NC 27214


How to Pick the Best Plumbing Trade School near Greensboro North Carolina

Greensboro North Carolina plumbing contractor fixing kitchen sink faucetThe first step to becoming a plumbing contractor or tradesman is finding a plumbing trade school near Greensboro NC. But with numerous technical schools to select from, just how do you go about making certain that you enroll in the best one? Especially because there are so many variables to evaluate. For example, many students will start by looking for schools that are close to their residence. After they have identified some that are within driving distance, they will pick the one with the cheapest tuition. Even though cost and location are of importance, they are not the only qualifications that must be examined. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifiers should contribute toward your final judgment when picking a plumbing training school. We will address that checklist in more detail later in this article. But first, let's review a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

Greensboro North Carolina plumber adjusting water pipe

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Greensboro NC plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Greensboro NC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Greensboro NC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Degree and Certificate Programs

There are several educational options available near Greensboro NC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Vocational Schools

Greensboro North Carolina plumbing contractor repairing water heater

Once you have decided to earn a diploma, certificate or degree, you can start to narrow down your training options. Considering that there are numerous plumbing tech and trade schools in the Greensboro NC area, it's important to have a checklist of qualifications that each school must meet. The first two that we mentioned were location and the cost of tuition. And even though both qualifiers may be important when making your selection, there are additional factors that must be considered as well. Following is a checklist of those added qualifications that you will need to research before selecting a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school's programs overall, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Make sure that the Greensboro NC school and program are accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping ensure that you receive an excellent education, it may help in acquiring financial aid or student loans, which are in many cases not available for non-accredited schools. Also, many states require that the plumbing training course be accredited for it to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the North Carolina Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Greensboro NC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A low completion rate could signify that students were dissatisfied with the course and dropped out. It could also indicate that the instructors were not qualified to instruct the students. It's similarly imperative that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of graduates, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but additionally that it has the network of contacts to help students acquire apprenticeships or employment in the Greensboro NC area.

Are Apprenticeship Programs Sponsored?  Many plumber training programs are taught in conjunction with an internship or an apprenticeship program. Those participating technical and vocational programs will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Find out if the schools you are reviewing have referring partnerships with local Greensboro NC plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by furnishing practical training, but it also furnishes employment opportunities and helps to build relationships in the local plumbing professional community.

Are there Modern Facilities?  Confirm that the school facilities and the equipment that you will be instructed on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, check with the master plumber you are working under regarding what you should be looking for. If not, ask a local Greensboro NC plumbing contractor if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school must be within commuting distance of your Greensboro NC home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there may be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can observe how big they are and witness first hand the interaction between students and instructors. Talk with some of the students and get their opinions regarding class sizes and instruction. Finally, talk with some of the teachers and learn what their level of experience is in Greensboro NC and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are assessing are flexible enough to fulfill your needs. If you are only able to attend classes at night or on weekends near Greensboro NC, verify that the schools you are comparing provide those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, illness or family responsibilities.

Get More Info About Greensboro Plumbing Trade Schools

Enroll in the Right Greensboro Plumber Vocational School

Picking the ideal plumbing training program will undoubtedly be the most important decision you will make to start your new profession. As we have covered in this article, there are many things that you will need to evaluate and compare between the training programs you are looking at. It's a necessity that any plumber training program that you are considering includes a good deal of hands-on instruction. Classes should be small in size and every student should have their personal equipment to train with. Classroom instruction should offer a real-world frame of reference, and the training program should be current and in-line with industry standards. Programs differ in length and the type of credential offered, so you will need to determine what length of program and credential will best serve your needs. Every training program provides different possibilities for certification as well. Probably The ideal approach to research your final list of schools is to visit each campus and speak with the students and faculty. Take the time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the best one for you. With the right training, hard work and dedication, you can become a professional plumber in Greensboro NC.